Philips Camera Accessories FMXXFD20B User Manual

Register your product and get support at  
USB Flash Drive  
FMXXFD20B/00  
EN  
FR  
DE  
ES  
Vintage edition  
Vintage edition  
Vintage edition  
Vintage edition  
Vintage edition  
Vintage edition  
Vintage edition  
Vintage edition  
Click here  
2
X
X
X
X
X
X
X
Cliquez ici  
Hier klicken  
Haga clic aquí  
Hier clicken  
Fare clic qui  
Clique aqui  
Щелкните здесь  
NL  
IT  
PR  
RU  
 
Note  
Notes on Use  
Data is safe in the following environments: In X-ray security systems at • The USB flash drive may not function correctly if it is connected to  
airports and in magnetic fields with strengths not exeeding 3,500 Oe.  
the computer when the computer is started up, restarted, or  
restored from sleep mode.Always disconnect the USB flash drive  
from the computer before performing any of these operations.  
• Do not place the drive in locations that are:  
– extremely hot or cold;  
For customers in the U.S.A.  
Changes or modifications made to this equipment not expressly  
approved by company may void the FCC authorization to operate this  
equipment.  
– vibrating;  
– exposed to corrosive gases;  
Operation is subject to the following two conditions:  
– dusty or dirty;  
this device my not cause harmful interference, and  
this device must accept any interference received, including  
interference that may cause undesired operation.  
– very humid;  
– exposed to direct sunlight.  
1
2
• Microsoft andWindows are registered trademarks of Microsoft  
Corporation in the United States and other countries.  
• Mac and Macintosh are trademarks of Apple Computer, Inc.,  
registered in the U.S. and other countries.  
• Other system names and product names that appear in this manual  
are registered trademarks or trademarks of their respective  
Caution  
You are cautioned that any changes or modifications not expressly  
approved in this manual could void your authority to operate this  
equipment.  
®
owners. Note that the ™ and symbols are not used in this  
For customers in Canada  
manual.  
This Class B digital apparatus complies with Canadian ICES-003.  
This device complies with Part 15 of the FCC Rules and with RSS-210  
of Industry Canada.  
• Power consumption in standby mode: < 100 mA.  
• Our product warranty is limited only to the USB flash drive itself,  
when used normally in accordance with these operating instructions  
and with the accessories that were included with this unit in the  
specified or recommended system environment. Services provided  
by the Company, such as user support, are also subject to these  
restrictions.  
For customers in Europe  
This product conforms to the following European Directives:  
89/336/EEC, 2006/95/EEC (safety directive) and 93/68/ECC (EC  
Marking Directive).This product complies with EN55022 Class B and  
EN55024 for use in the following areas; residential, commercial, and  
light-industrial.  
• The Company cannot accept liability for damage or loss resulting  
from the use of this unit, or for any claim from a third party.  
3
 
• The Company cannot accept any liability for: problems with your  
computer or other hardware arising from the use of this product;  
the suitability of this product for specific hardware, software, or  
peripherals; operating conflicts with other installed software; data  
loss; or other accidental or unavoidable damage.  
Please act according to your local rules and do not dispose of your old  
products with your normal household waste.The correct disposal of  
your old product will help prevent potential negative consequences for  
the environment and human health.  
• The Company cannot accept any liability for financial damages, lost  
profits, claims from third parties, etc., arising from the use of the  
software provided with this unit.  
• The software specifications may be subject to change without  
notice.  
Environmental information  
Disposal of your old product  
Your product is designed and manufactured with high quality materials The making of unauthorized copies of copy-protected material,  
and components, which can be recycled and reused.  
including computer programmes, files, broadcasts and sound  
recordings, may be an infringement of copyrights and constitute a  
criminal offence. 186  
This equipment should not be used for such purposes.  
When this crossed-out wheeled bin symbol is attached to a product it  
means the product is covered by the European Directive 2002/96/EC.  
Please inform yourself about the local separate collection system for  
electrical and electronic products.  
4
 
2 Your USB flash drive  
3 Install  
®
Congratulations on your purchase and welcome to Philips!  
Microsoft WindowsVista, XP, 2000, ME, MAC OS 9.0 or  
higher:  
To fully benefit from the support that Philips offers, register your  
• The device driver is installed automatically when the drive is  
connected to a USB port of the computer. However, with some USB  
2.0 cards or boards, you may need to initiate installation manually. In  
this case, follow the on-screen instructions to search for a suitable  
driver. Refer to the operating system's Help file if you need any  
help.  
1
Note  
Do not remove USB flash drive from the computer USB port as long  
as the download process is in progress.  
Windows 98SE:  
1
2
3
Download the device driver at  
Remove the protective cap from the USB connector and turn  
it backwards (fig. 1).  
Insert the flash drive USB connector into one of the computer’s  
USB ports (fig. 2).  
2
>The New Hardware wizard starts and the drive’s LED lights up.  
The light intensity of the LED will gradually increase and then  
diminish again.This will continue for as long as the drive is  
connected to the computer.  
4
Click the Next button.  
5
 
5
Click Search for the best driver for your device.Then click  
the Next button.  
4 Connect  
Click Specify a location.Then click the Browse button.  
When the dialog box appears, specify the folder where the  
installation program is stored.  
6
7
Connecting the USB flash drive to your computer  
Click the OK button to close the dialog box.Then click the  
Next button.  
Click the Next button.  
Note  
You can use a USB extension cable or an optional USB hub to connect  
the USB flash drive to your computer.  
8
9
Click the Finish button.  
> Installation of the driver starts.  
> Once the installation process is complete, a drive icon for the  
USB flash drive appears in the My Computer window.  
1
10 After confirming that the drive is in standby mode you can remove  
the drive from the computer’s  
USB port.  
1
Remove the protective cap from the USB connector and turn  
it backwards (fig. 1).  
6
 
2
5 Enjoy  
Operating the USB flash drive  
• Once the USB flash drive is connected to the USB port of the  
computer:  
a software package will automatically start up enabling you to  
activate various applications. See the software help file for futher  
instructions.  
questions and software updates.  
the drive icon for the USB flash drive will appear.You can now  
copy and save data on the drive by dragging files and folders on  
the drive icon, just like when you copy data to a hard disk,  
CD-ROM, DVD or floppy disk.  
2
Insert the USB flash drive’s USB connector into one of the  
computer’s USB ports (fig. 2).  
>The USB flash drive’s LED lights up.The light intensity of the  
LED will gradually increase and then diminish again.This will  
continue for as long as the drive is connected to the computer.  
>When copying data the LED’s light intensity will quickly  
increase and diminish.  
Notes  
Do not remove the USB flash drive from the computer USB port  
while copying and saving data otherwise the drive will no longer be  
recognized by your system.  
When operating underWindows the drive name varies, depending  
on yourWindows version.  
7
 
Disconnecting the USB flash drive from your computer  
Mac OS 9.0 and higher  
1
Drag the drive icon to the Trash.  
After confirming that the the USB flash drive is in standby mode,  
remove the the USB flash drive from the computer’s USB port.  
®
Windows 98SE  
2
• After confirming that the USB flash drive is in standby mode you can  
remove the flash drive from the computer’s USB port.  
®
®
Windows ME andWindows 2000  
1
2
3
4
Double-click the Unplug or eject hardware icon in the task bar 6 Technical specifications  
in the lower right part of the screen.  
In the window that appears, select the name of the device that is to  
be removed, then click the STOP button.  
Interface  
• High-Speed USB 2.0 (backwards compatible with USB 1.1)  
Transfer rate  
Read: max. 15MB per second /Write: max. 3MB per second  
(High-speed USB 2.0 port required to achieve maximum speed)  
Compatible OSs  
When the Stop a hardware device screen appears, make sure  
the correct information is displayed, then click the OK button.  
When a message appears, indicating that the USB flash drive can be  
safely removed, remove the USB flash drive from the computer’s  
USB port.  
®
®
• Microsoft Windows Vista, XP, 2000, ME and 98SE (with driver)  
• Mac OS 9.0 or later  
®
Windows Vista, XP  
• Linux 2.4.0 or later  
1
2
3
4
Double-click the Safely Remove Hardware icon in the task bar  
in the lower right part of the screen.  
In the window that appears, select the name of the device that is  
to be removed, then click the STOP button.  
When the Stop a hardware device screen appears, make sure  
the correct information is displayed, then click the OK button.  
When the message Safe to Remove Hardware appears, remove For interactive help and frequently asked questions.  
the the USB flash drive from the computer’s USB port. For software updates and support: www.philips.com/storage.  
7 Need help?  
8
 
9
 
© 2007 Koninklijke Philips Electronics N.V.  
All rights reserved. Reproduction in whole or in part is prohibited  
without the prior written consent of the copyright owner.  
The information presented in this document does not form part of any  
quotation or contract,is believed to be accurate and reliable and may  
be changed without notice. No liability will be accepted by the  
publisher for any consequence of its use. Publication there of does not  
convey nor imply any license under patent- or other industrial or  
intellectual property rights.  
June 2007  
NMW/RR/RD/2607  
 

PCAvionics Computer Hardware pea 6005 User Manual
Peavey Speaker System 12 D User Manual
Peerless Industries Washer Dryer ACC 550 User Manual
Philips Indoor Furnishings 42234 17 16 User Manual
Philips Speaker System MCD 700 User Manual
Philips Stereo System SWA3102W User Manual
Playskool Musical Toy Instrument 8979 User Manual
Polaroid Scanner 45I User Manual
Poulan Lawn Mower PR25PH48STB User Manual
ProForm Treadmill 831293330 User Manual