Philips DVD Player PDCC JH 0811 User Manual

MCD177  
DVD MicroTheater  
Register your product and get support at  
User manual  
 
Index  
English ------------------------------------------------ 4  
3
 
Contents  
General Information  
Disc Operations  
Features .................................................................. 6  
Supplied accessories ............................................ 6  
Environmental information ................................ 6  
Safety information ............................................6~7  
Maintenance .......................................................... 7  
Hearing Safety ....................................................... 7  
Playable Discs ...................................................... 21  
Region Codes...................................................... 21  
Playing discs ......................................................... 22  
Using the Disc Menu ......................................... 22  
Resuming playback ............................................. 22  
Selecting and searching .............................. 22~23  
Selecting a different track/chapter  
Fast forwarding/reversing  
Slow forwarding/reversing  
Connections  
Step 1:Placing speakers ...................................... 8  
Step 2:Connecting speakers.............................. 8  
Step 3:ConnectingTV set ........................... 9~10  
Using Video In jack (CVBS)  
Using Headphone jack  
Using componentVideo In jack (Pr PbY)  
Using S-Video In jack  
Different play modes:REPEAT, SHUFFLE and  
REPEAT A-B ......................................................... 23  
REPEAT  
Repeat A-B  
Programming favourite chapters/tracks ........ 24  
Display information............................................ 24  
Moving to another title/chapter ..................... 24  
Viewing from another angle............................. 25  
ZOOM.................................................................. 25  
AUDIO ................................................................. 25  
SUBTITLE............................................................. 25  
Playing MP3/Picture disc (Kodak, JPEG) . 25~26  
Playing MP3 music and JPEG pictures  
Using an accessory RF modulator  
Step 4: Connecting the FM antenna ............... 11  
Step 5:Connecting the power cord............... 11  
Step 6:Connecting aVCR or cable/satellitebox  
................................................................................ 11  
Step 7: Connecting digital audio equipment. 12  
Step 8:Connecting portable audio player .... 12  
simultaneously..................................................... 26  
Playing a Divx disc .............................................. 27  
Functional Overview  
Controls on the system .................................... 13  
Remote control ........................................... 14~15  
System Menu Options  
Basic operations ................................................. 28  
General Setup Page............................................ 28  
OSD Lang  
Screen Saver  
DIVXVOD  
Audio Setup Page ........................................ 28~29  
Night Mode  
Digital Output  
Dolby Digital Setup  
Video Setup Page......................................... 29~30  
TV Display  
Progress  
TV Type  
Preference Page ........................................... 30~31  
Audio  
Getting Started  
Step 1:Using the Remote Control ................. 16  
Step 2:Setting up theTV ........................... 16~18  
Selecting the color system that matches your  
TV set  
Setting up Progressive Scan feature (for  
Progressive Scan TV only)  
To deactivate Progressive manually  
Step 3:Setting language preference ................ 18  
Setting the OSD Language  
Setting the Audio, Subtitle and Disc Menu  
language  
Subtitle  
Basic Operations  
Disc Menu  
Parental  
Password  
Divx Subtitle  
Default  
Plug and Play (for tuner installlation)........................ 19  
Switching the system on/off ............................. 19  
Power saving automatic standby ..................... 19  
Volume control ................................................... 20  
Sound Control .................................................... 20  
DBB (Dynamic Bass Boost)  
DSC (Digital Sound Control)  
LOUDNESS  
4
 
Contents  
Radio Reception  
Tuning to radio stations .................................... 32  
Programming radio station .............................. 32  
Automatic programming  
Manual programming  
Tuning to preset radio stations ....................... 32  
USB Connection  
Using USB connectivity.............................. 33~34  
Clock/Timer  
Viewing clock ...................................................... 35  
Setting clock ........................................................ 35  
Setting wake-up timer ....................................... 35  
Setting sleep timer ............................................. 35  
Specifications ........................................... 36  
Troubleshooting ............................. 37~39  
Glossary......................................................... 40  
5
 
General Information  
Congratulations on your purchase and  
welcome to Philips!  
Environmental information  
All unnecessary packaging has been omitted.We  
have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene (bags,  
protective foam sheet).  
To fully benefit from the support that Philips  
offers, register your product at  
Features  
Additional Component Connections  
Lets you connect other audio and audio/visual  
components to the DVD micro system.  
Your system consists of materials which can be  
recycled and reused if disassembled by a  
specialised company. Please observe the local  
regulations regarding the disposal of packaging  
materials, exhausted batteries and old  
equipment.  
Parental Control (Rating Level)  
Lets you set a ratings level so that your children  
cannot watch a DVD that has a rating higher  
than you set.  
Safety information  
Before operating the system, check that the  
operating voltage indicated on the typeplate (or  
the voltage indication beside the voltage  
selector) of your system is identical with the  
voltage of your local power supply. If not, please  
consult your dealer.  
Sleep/Wake-upTimer  
Enables the system to switch on/off automatically  
at a preset time.  
Progressive Scan  
Provides high quality flicker-free images for film  
based sources.When a picture refreshes, its  
vertical resolution can double to 525 lines.  
Where the MAINS plug or an appliance coupler  
is used as the disconnet device, the disconnect  
device shall remain readily operable.  
Place the system on a flat, hard and stable  
surface.  
Note:  
– To fully enjoy the progressive scan feature, you  
need a progressive scanTV.  
The apparatus shall not be exposed to  
dripping or splashing.  
Install the unit near the AC outlet and where the  
AC power plug can be easily reached.  
Supplied accessories  
– Remote control with one CR2025 battery  
Two speakers  
– 1 X certified AC/DC 24V adaptor  
(Brand name: PHILIPS,  
Model No.:AS650-240-AB270  
or OH-1065A2402700  
Place the system in a location with adequate  
ventilation to prevent internal heat build-up in  
your system. Allow at least 10 cm (4 inches)  
clearance from the rear and the top of the unit  
and 5 cm (2 inches) from each side.  
The ventilation should not be impeded by  
covering the ventilation openings with items,  
such as newspapers, table-cloths, curtains, etc.  
Input: 100-240V ~50/60Hz 1.5A,  
Output: 24.0V  
2.7A)  
– A/V cable (yellow/red/white)  
– FM wire antenna  
– User Manual and Quick Start Guide  
Do not expose the system, batteries or discs to  
excessive moisture, rain, sand or heat sources  
caused by heating equipment or direct sunlight.  
If any item is damaged or missing, contact  
your retailer or Philips.  
No naked flame sources, such as lighted candles,  
should be placed on the apparatus.  
No objects filled with liquids, such as vases, shall  
be placed on the apparatus.  
6
 
General Information  
If the system is brought directly from a cold to a  
warm location, or is placed in a very damp room,  
moisture may condense on the lens of the disc  
unit inside the system. Should this occur, the CD  
player would not operate normally. Leave the  
power on for about one hour with no disc in the  
system until normal playback is possible.  
Hearing Safety  
Listen at a moderate volume.  
Using headphones at a high volume can impair  
your hearing. This product can produce sounds  
in decibel ranges that may cause hearing loss for  
a normal person, even for exposure less than a  
minute. The higher decibel ranges are offered  
for those that may have already experienced  
some hearing loss.  
The mechanical parts of the set contain self-  
lubricating bearings and must not be oiled or  
lubricated.  
Sound can be deceiving. Over time your hearing  
"comfort level" adapts to higher volumes of  
sound. So after prolonged listening, what sounds  
"normal" can actually be loud and harmful to  
your hearing. To guard against this, set your  
volume to a safe level before your hearing  
adapts and leave it there.  
Batteries (battery pack or batteries installed)  
shall not be exposed to excessive heat such as  
sunshine, fire or the like.  
When the system is switched to Standby  
mode, it is still consuming some power.  
To disconnect the system from the  
power supply completely, remove the AC  
power plug from the wall socket.  
To establish a safe volume level:  
Set your volume control at a low setting.  
Maintenance  
Slowly increase the sound until you can hear it  
comfortably and clearly, without distortion.  
When a disc becomes dirty,  
clean it with a cleaning cloth.  
Wipe the disc from the center  
out, in a straight line.  
Listen for reasonable periods of time:  
Prolonged exposure to sound, even at normally  
"safe" levels, can also cause hearing loss.  
Do not expose the player,  
batteries or discs to humidity,  
rain, sand or excessive heat  
(caused by heating equipment or direct sunlight).  
Always keep the disc tray closed to avoid dust  
on the lens.  
Be sure to use your equipment reasonably and  
take appropriate breaks.  
Be sure to observe the following  
guidelines when using your headphones.  
Do not use solvents such as benzene, thinner,  
commercially available cleaners, or anti-static  
spray intended for colour discs.  
Listen at reasonable volumes for reasonable  
periods of time.  
Be careful not to adjust the volume as your  
hearing adapts.  
The lens may cloud over when the player is  
suddenly moved from cold to warm  
surroundings, making it impossible to play a disc.  
Leave the player in the warm environment until  
the moisture evaporates.  
Do not turn up the volume so high that you  
can't hear what's around you.  
You should use caution or temporarily  
discontinue use in potentially hazardous  
situations.  
Do not use headphones while operating a  
motorized vehicle, cycling, skateboarding, etc.; it  
may create a traffic hazard and is illegal in many  
areas.  
7
 
Connections  
Step 1: Placing speakers  
Step 2: Connecting speakers  
Connect the speaker wires to the SPEAKER  
terminals, right speaker to "R" and left speaker to  
"L", coloured (marked) wire to "+" and black  
(unmarked) wire to "-". Fully insert the stripped  
portion of the speaker wire into the terminal as  
shown.  
Place the left and right speakers at equal  
distances from theTV set and at an angle of  
approximately 45 degrees from the listening  
position.  
Notes:  
– For optimal sound performance, use the  
supplied speakers.  
– Do not connect more than one speaker to any  
one pair of +/- speaker terminals.  
– Do not connect speakers with an impedance  
lower than the speakers supplied. Please refer to  
the SPECIFICATIONS section of this manual.  
Notes:  
– To avoid magnetic interference, do not position  
the front speakers too close to yourTV set.  
– Allow adequate ventilation around the DVD  
System.  
IMPORTANT!  
The type plate is located on the bottom  
of the system.  
To avoid overheating of the system, a  
safety circuit has been built in. Therefore,  
your system may switch to Standby  
mode automatically under extreme  
conditions. If this happens, let the system  
cool down before reusing it.  
8
 
Connections  
Using Headphone jack  
Step 3: ConnectingTV set  
IMPORTANT!  
You only need to make one video  
connection from the following options,  
according to the capabilities of yourTV  
system.  
– S-Video or ComponentVideo  
connection provides higher picture  
quality. These options must be available  
on yourTV set.  
Y
PB  
PR  
– Connect the system directly to theTV  
set.  
Using Video In jack (CVBS)  
To listen toTV through this system, use a cinch  
cable (not supplied) to connect AUX IN jack  
(3.5mm) to the HEADPHONE jack on theTV  
set (with a 3.5mm-diameter stereo jack).  
Or, you may use a cinch calbe (not supplied) to  
connect AUX IN jack (3.5mm) to audio out  
jacks on theTV set.  
IN  
Y
PB  
PR  
Use the supplied composite video cable (yellow)  
to connect the system’s COMPOSITE  
VIDEO jack to the video input jack (or labeled  
as A/V In,Video In, Composite or Baseband) on  
theTV set.  
Y
PB  
PR  
To hear the sound of this DVD Player through  
yourTV, use the audio cables (white/red,  
supplied) to connect LINE OUT (L/R) jacks of  
the DVD Player to the corresponding AUDIO  
IN jacks on theTV.  
Before starting operation, press AUX on the  
remote control to selectAUX ” in order to  
activate the input source.  
9
 
Connections  
Using S-Video In jack  
Using componentVideo In jack (Pr PbY)  
Use the component video cables (red/blue/  
green, not supplied) to connect the system’s PR/  
PB/Y jacks to the corresponding Component  
video input jacks (or labeled as Pr/Cr Pb/CbY or  
YUV) on theTV set.  
To hear the sound of this DVD Player through  
yourTV, use the audio cables (white/red,  
supplied) to connect LINE OUT (L/R) jacks of  
the DVD Player to the corresponding AUDIO  
IN jacks on theTV.  
Y
PB  
PR  
Use the S-Video cable (not supplied) to connect  
the system’s S-VIDEO jack to the S-Video input  
jack (or labeled asY/C or S-VHS) on theTV set.  
To hear the sound of this DVD Player through  
yourTV, use the audio cables (white/red,  
supplied) to connect LINE OUT (L/R) jacks of  
the DVD Player to the corresponding AUDIO  
IN jacks on theTV.  
Y
PB  
PR  
Using an accessory RF modulator  
IMPORTANT!  
Notes for progressive scan video:  
– If yourTV set only has a single  
Antenna In jack (or labeled as 75 ohm or  
RF In), you will need a RF modulator in  
order to view the DVD playback viaTV.  
See your electronics retailer or contact  
Philips for details on RF modulator  
availability and operations.  
– The progressive scan video quality is only  
possible when usingY Pb Pr, and a progressive scan  
TV is required.  
– If you are using a Progressive ScanTV (TV must  
indicate Progressive Scan or ProScan capability), to  
activateTV Progressive Scan, please refer to yourTV  
user manual. For DVD system’s Progressive Scan  
function, see “Getting Started - Setting up  
Progressive Scan feature’’.  
– If yourTV does not support Progressive Scan, you  
will not be able to view the picture.Turn off  
progressive scan in PROGRESSIVE menu of the  
system setup menu.  
Y
PB  
PR  
Use the supplied composite cable (yellow) to  
connect the system’s COMPOSITEVIDEO  
jack to the video input jack on the RF modulator.  
Use the RF coaxial cable (not supplied) to  
connect the RF modulator to yourTV’s RF jack.  
10  
 
Connections  
Step 4: Connecting the FM  
antenna  
Step 6: Connecting aVCR or  
cable/satellite box  
Connect the supplied FM antenna to the FM (75  
) jack at the back of the main unit. Extend the  
FM antenna and fix its end to the wall.  
Using theVCR for recording DVDs  
Step 5: Connecting the power  
cord  
IMPORTANT!  
Never make or change any  
connection with the power switched on.  
Y
PB  
PR  
PR  
Some DVDs are copyright-protected.You cannot  
record or dub protected discs usingVCR.  
1 Connect the system’s COMPOSITEVIDEO  
jack to theVIDEO IN jacks on theVCR.  
2 Connect the system’s LINE OUT (R/L) jacks to  
to the AUDIO IN jacks on theVCR.This will  
allow you to make analog stereo (two channels,  
right and left).  
After everything is connected properly, plug in  
the AC power cord to the power socket.  
11  
 
Connections  
Step 7: Connecting digital  
audio equipment  
Step 8: Connecting portable  
audio player  
Y
PB  
PR  
Y
PB  
PR  
Digital audio recorder  
Recording (digital)  
Portable audio player(MP3)  
Connect the system’s COAXIAL OUT (digital  
out) jack to the DIGITAL IN jack on a digital  
recording device (DTS-DigitalTheater System  
compatible, with a Dolby Digital decoder, for  
example).  
Connect the system’s AUX jack (diameter  
3.5mm) to the HEADPHONE jack (diameter  
3.5mm) on a portable audio player.  
Before starting playback, press AUX on the  
remote control to select “AUX” in order to  
activate the input source.The music will be heard  
through the speakers.  
Before operation, set COAXIAL OUTPUT  
according to the audio connection.  
12  
 
Functional Overview  
!
0
D
7
1 2  
3
4 5 6 7 89  
6MODE  
Controls on the system  
selects various repeat modes or the shuffle play  
mode for a disc (For VCD with PBC feature,  
PBC must be turned off).  
1STANDBY ON (2)  
switches the system on or to Eco-power standby  
/standby mode.  
7VOLUME  
2SOURCE  
adjusts the volume upward/downward.  
selects the respective sound source: DISC/USB/  
FM/AUX.  
switches on the system.  
2;........................... starts or interrupts disc playback.  
9 ............................. stops disc playback or erases a  
programme.  
8DISPLAY/CLOCK  
Disc ....................... displays the current status and/or  
disc information.  
clock...................... sets and views the clock.  
9OPEN/CLOSE0  
í/ ë  
opens/closes the disc door.  
Disc ....................... press to skip to the previous/  
next chapter/title/track.  
Tuner .................... selects a preset radio station  
clock/timer ........ adjusts the minutes for the clock/  
timer function.  
0USB port  
connects to external USB mass storage device.  
!iR SENSOR  
point the remote control towards this sensor.  
3 TUNING à / á  
Tuner .................... tunes to a radio station  
Disc ....................... fast searches backward/forward  
in a disc at different speeds.  
clock/timer ........ adjusts the hours for the clock/  
timer function.  
4 DSC (Digital Sound Control)  
selects different types of preset sound equalizer  
settings.  
5 DBB (Dynamic Bass Boost)  
enables or disables bass enhancement.  
13  
 
Functional Overview  
6OK  
confirms a selection.  
4 / 3 / 5 / 6  
selects an item in a menu.  
1
2
moves an enlarged picture up/down/left/right.  
5 / 6  
Disc ....................... fast searches backward/forward  
in a disc at different speeds.  
#
$
%
3
4
5
Tuner .................... tunes to radio stations.  
clock/timer......... adjusts the hours for the clock/  
timer function.  
6
7DSC (Digital Sound Control)  
selects different types of preset sound equalizer  
settings.  
7
8
^
&
8ÉÅ  
starts or interrupts disc playback.  
9
9¡ / ™  
0
!
Disc ....................... press to skip to the previous/  
*
next chapter/title/track.  
Tuner .................... selects a preset radio station  
clock/timer......... adjusts the minutes for the clock/  
timer function.  
(
)
¡
@
09  
stops disc playback or erases a programme.  
!Numeric Keypad (0-9)  
inputs a track/title/chapter number of the disc.  
@ANGLE/PROG  
Picture CD ........ during playback, to select a slide  
show mode.  
Remote control  
1B  
DVD ..................... selects a DVD camera angle.  
Tuner .................... program the favourite stations.  
Tuner..................... press and hold to start automatic  
preset programming.  
switches the system on or to Eco-power standby  
/standby mode.  
2Source buttons  
Disc/USB ............ program the favourite tracks.  
selects the respective sound source: DISC/USB/  
FM/AUX.  
#SLEEP/TIMER  
activates/deactivates or selects the sleep timer.  
activates/deactivates or sets the wake-up timer.  
switches on the system.  
3MODE  
selects various repeat modes or the shuffle play  
$DISPLAY/CLOCK  
Disc ....................... displays the current status and/or  
disc information.  
clock...................... sets and views the clock.  
mode for a disc (For VCD with PBC feature,  
PBC must be turned off).  
4SYSTEM MENU  
enters or exits the system menu.  
5REPEAT A-B  
%DISC MENU  
for DVD, enters or exits disc contents menu.  
forVCD/SVCD, toggle between PBC ON or  
OFF.  
repeats playback of a specific section within a  
chapter or a track.  
14  
 
Functional Overview  
^LOUD/DBB  
enables or disables automatic loudness  
adjustment.  
enables or disables bass enhancement.  
&VOL +/-  
adjusts the volume upward/downward.  
*MUTE  
disables or enables sound output.  
(AUDIO  
forVCD  
sets stereo, mono left, mono right or mix mono  
sound mode.  
for DVD  
selects an audio language.  
)ZOOM  
zoom in or out the picture.  
¡SUBTITLE  
selects a subtitle language.  
GOTO  
In DISC mode, to fast search in a disc by  
entering a time, title, chapter or track.  
Notes for remote control:  
– First select the source you wish to control  
by pressing one of the source select keys on  
the remote control (for example DISC ,  
FM).  
– Then select the desired function (for  
exampleÉÅ, í, ë).  
15  
 
Getting Started  
Step 1: Using Remote Control  
Step 2: Setting up theTV  
IMPORTANT!  
IMPORTANT!  
– Before using the remote control,  
remove the insulation plastic tab as  
shown in the picture below.  
Make sure you have completed all the  
necessary connections. (See  
“ConnectingTV”).  
– If the remote control does not  
function correctly or the operating range  
is reduced, replace the battery with a  
new (CR2025) battery.  
1 Switch the DVD system on and then select  
DISC source. (See “Switching the system on/  
off).  
2 Turn on theTV and set to the correct video-in  
channel.You should see the blue Philips DVD  
background screen on theTV.  
Usually these channels are between the  
lowest and highest channels and may be called  
FRONT, A/V IN, orVIDEO. See yourTV manual  
for more details.  
Or, you may go to channel 1 on yourTV, then  
press the Channel up button repeatedly until  
you see theVideo In channel.  
Or, theTV Remote Control may have a  
button or switch that chooses different video  
modes.  
Or, set theTV to channel 3 or 4 if you are  
using an RF modulator.  
Selecting the color system that matches  
yourTV set  
1 Push to open the battery tray.  
2 Replace a new battery according to the  
This DVD system is compatible with both NTSC  
and PAL. For the playback of a DVD disc on this  
DVD system, the color systems of the DVD,TV  
set and DVD System should match.  
indicated polarity.  
3 Push the battery tray back to close it.  
Using the Remote Control to operate  
the Player  
1 Aim the Remote Control  
directly at the remote sensor  
(IR) on the front panel.  
2 Select the source you wish to  
control by pressing one of the  
source select buttons on the  
remote.  
3 Then select the desired  
function (for example, ÉÅ, ¡  
or ).  
CAUTION!  
Remove the battery if it is exhausted  
or if the Remote Control is not being  
used for a long time.  
Batteries contain chemical substances,  
so they should be disposed of properly.  
16  
 
Getting Started  
1 In disc mode, press SYSTEM MENU.  
1 Turn on yourTV.  
2 Press à / á / 4 / 3 keys on the remote  
control to navigate in the menu.  
2 Turn off yourTV progressive scan mode or turn  
on interlaced mode (refer to yourTV user  
manual).  
Move to “Video Setup Page”and press 4.  
Move to “TVTYPE” and press á.  
3 Press STANDBY-ONB to turn on the DVD  
PAL  
player.  
– Select this if the connectedTV set is PAL  
system. It will change the video signal of an  
NTSC disc and output to PAL format.  
4 Select the correctVideo Input channel.  
5 In disc mode, press SYSTEM MENU.  
NTSC  
6 Press à / á / 4 / 3 keys on the remote  
control to navigate in the menu.  
– Select this if the connectedTV set is NTSC  
system. It will change the video signal of a PAL  
video disc and output to NTSC system.  
Move to “Video Setup Page”and press 4.  
Move to “Progressive”>”On” and press OK.  
MULTI  
– Select this if the connectedTV set is  
compatible with both NTSC and PAL (multi  
system).The output format will be consistent wit  
the video signal of the disc.  
3 Select an item and press OK.  
The screen messages for further setting  
confirmation may appear. Follow the on-screen  
instructions to proceed to confirm the setting or  
not.  
To remove the menu  
Press SYSTEM MENU.  
There will be a distorted picture on your  
TV at this state until you turn on the  
progressive scan mode on yourTV.  
Setting up Progressive Scan feature (for  
Progressive ScanTV only)  
7 Turn on yourTV progressive scan mode (refer to  
The progressive scan display twice the number  
of frames per seconds than interlaced scanning  
(ordinary normalTV system).With nearly double  
the number of lines, progressive scan offers  
higher picture resolution and quality.  
yourTV user manual).  
8 In the confirmation menu, press à / á to  
highlight OK in the menu and press OK on the  
remote to confirm.  
Progressive scan is now set on.  
If distorted picture still appears, it indicates  
that yourTV doesn’t support progressive scan. In  
this case, turn off progressive scan as described  
in “To deactivate Progressive manually”.  
IMPORTANT!  
Before enabling the progressive scan  
feature, you must ensure:  
1)YourTV can accept progressive signals, a  
progressive scanTV is required.  
2)You have connected the DVD player to your  
TV usingY Pb Pr (see “ConnectingTV set”)  
3) Make sure Component has been set toYUV.  
9 Press SYSTEM MENU on the remote to exit  
the system menu.  
The setup is complete now and you can start  
enjoying the high quality picture.  
17  
 
Getting Started  
To deactivate Progressive manually  
Setting the Audio, Subtitle and Disc  
Menu language  
When the distorted sign still appears on  
theTV, it may be because the connectedTV  
does not accept progressive signals, and  
progressive is set by mistake.You must reset the  
unit to interlace format.  
– – Preference Page – –  
Audio  
English  
Subtitle  
Spanish  
Portuguese  
Chinese  
Thai  
1 Turn off yourTV progressive scan mode or turn  
on to interlaced mode (refer to yourTV user  
manual).  
Disc Menu  
Parental  
Password  
Divx Subtitle  
Default  
2 Turn off progressive scan by selecting “OFF”  
under PROGRESSIVE menu, then pressing OK  
on the remote control.  
Progressive scan is turned off.  
1 In disc mode, press SYSTEM MENU  
2 Press à / á / 4 / 3 keys on the remote  
control to navigate in the menu.  
Step 3: Setting language  
preference  
Move to “Preference Page” and press 4.  
Move to one of the following and press á.  
– “Audio” (disc’s soundtrack)  
– “Subtitle” (disc’s subtitles)  
– “Disc Menu” (disc’s menu)  
You can select your own preferred language  
settings.This DVD system will automatically  
switch to the selected language whenever you  
load a disc. If the language selected is not  
available on the disc, the disc’s default language  
will be used instead.The OSD language in the  
system menu will remain once selected.  
3 Press 4 / 3 to select a language and press OK.  
To remove the menu  
Press SYSTEM MENU.  
Setting the OSD Language  
1 In disc mode, press SYSTEM MENU  
2 Press à / á / 4 / 3 keys on the remote  
control to navigate in the menu.  
Move to “General Setup Page” and press 4.  
Move to “OSD Lang” and press á.  
3 Press 4 / 3 to select a language and press OK.  
To remove the menu  
Press SYSTEM MENU.  
18  
 
Basic Operations  
IMPORTANT!  
Switching the system on/off  
Before you operate the system,  
complete the connection procedures.  
When the system is switched to  
Standby mode, it is still consuming  
power.To disconnect the system from the  
power supply completely, reomve the AC  
power plug from the wall socket.  
In standby/Eco-power standby mode, press  
STANDBY-ONB or SOURCE on the set,  
or DISC, USB, FM or AUX on the remote to  
switch on the system.  
The system will switch to the selected or last  
selected source.  
To switch the system to standby mode  
Plug and Play (for tuner installlation)  
Plug and Play allows you to store all available  
radio stations automatically.  
In power-on mode, press briefly STANDBY-  
ONB (B on the remote).  
The clock time will be displayed. Or "--:--"  
will be displayed if clock time is not set.  
First time setup/power up  
1 When you turn on the main supply, "AUTO  
To switch the system to Eco-power  
standby mode  
INSTALL- PRESS PLAY " is displayed.  
2 Press ÉÅ on the system to start installation.  
"PLUG AND PLAY" .... "INSTALL" is  
displayed, followed by "TUNER" and "AUTO".  
PROG starts flashing.  
In power-on mode, press and hold STANDBY-  
ONB (B on the remote).  
“ECO POWER” is displayed briefly.  
Eco-power lamp B on the front panel will  
light up.  
The system will automatically store the radio  
stations (FM only ) with sufficient signal strength.  
When all the available radio stations are  
stored or the memory for 20 presets are used,  
the last preset radio station will be played.  
The LCD display will go blank.  
Helpful hints:  
Pressing and holding B on the remote can  
switch between Eco-power standby and normal  
standby.  
To reinstall Plug and Play  
1 In standby mode, press and holdÉÅ on the  
system until "AUTO INSTALL- PRESS  
PLAY" is displayed.  
Power saving automatic standby  
As a power-saving feature, the system will  
automatically switch to Standby mode if you  
don’t press any button within 15 minutes in the  
stop mode.  
2 Press ÉÅ again to start installation.  
All previously stored radio stations will be  
replaced.  
To exit without storing the Plug and Play  
Press 9 on the system.  
If you do not complete the Plug and Play  
installation, the function will be restarted when  
you next turn on the main supply again.  
Notes:  
– If no stereo frequency is detected during Plug  
and Play, "CHECK ANTENNA" will be displayed.  
19  
 
Basic Operations  
Volume control  
LOUDNESS  
Press VOLUME (or VOL +/- on the remote)  
to increase or decrease the volume level.  
The display briefly shows ”VOL” and a volume  
value from “01” to “31” ( “MIN” or “MAX” is  
displayed when adjusted to the lowest or highest  
volume level).  
LOUDNESS feature enables the system to  
automatically increase the treble and bass sound  
effect at low volume (the higher the volume, the  
lower the treble and bass increase).  
Press and hold LOUD/DBB on the remote  
control to enable/disable LOUDNESS feature.  
icon appears/disappears after this feature  
To switch off the volume temporarily  
Press MUTE on the remote.  
is enabled/disabled.  
Playback will continue without sound and  
MUTE” appears.  
To activate sound reproduction, you can:  
– press MUTE again;  
– adjust the volume controls;  
– change source.  
Sound Control  
DBB (Dynamic Bass Boost)  
DBB enhances the bass response.  
Press breifly LOUD/DBB to enable or disable  
DBB feature.  
If DBB is activated,DBB” will be shown.  
Helpful hints:  
Some discs might be recorded in high  
modulation, which causes a distortion at high  
volume. If this occurs, switch off DBB or reduce the  
volume.  
DSC (Digital Sound Control)  
DSC provides a different type of preset sound  
equalizer setting.  
Press DSC on the remote (or on the system)  
repeatedly to select:  
POP(default), CLASSIC, ROCK, JAZZ.  
20  
 
Disc Operations  
IMPORTANT!  
Region Codes  
– Depending on the DVD orVIDEO CD,  
some operations may be different or  
restricted.  
– Do not push on the disc tray or put  
any objects other than disc on the disc  
tray. Doing so may cause the disc player  
malfunction.  
DVD discs and players are designed with  
regional restrictions. Before playing a disc, make  
sure the disc is for the same region as your  
player.The regional code for this unit is indicated  
at the bottom panel.  
– If the inhibit icon appears on theTV  
screen when a button is pressed, it  
means the function is not available on  
the current disc or at the current time.  
4
Note:  
– If you are having trouble playing a certain disc,  
remove the disc and try a different one. Improper  
formatted disc will not play on this DVD Player.  
Playable Discs  
Your DVD Player will play:  
– DigitalVersatile Discs (DVDs)  
– Video CDs (VCDs)  
– SuperVideo CDs (SVCDs)  
– Finalised DVD recordable (DVD R)  
– DigitalVersatile Discs + Recordable  
(DVD+R)  
– DigitalVersatile Discs + Rewritable  
(DVD+RW)  
– Audio Compact Discs (CDs)  
– MP3/WMA discs, picture (Kodak, JPEG) files  
on CD-R (W)  
– ISO 9660/UDF format  
– JPEG resolution support up to 3073x2048  
– Supported sampling frequencies: 32kHz,  
44.1kHz, 48kHz.  
– Supported Bit-rates: 32~256 (kbps), variable  
bit rates (average 128kbps)  
– DivX files on CD-R(W)/DVD+R(W):  
DivX 3/4/5  
21  
 
Disc Operations  
Playback control (PBC)  
Playing discs  
PBC playback allows you to playVideo CD  
interactively, following the menu on the display.  
1 For DVDs andVCDs, make sure that the system  
is properly connected to yourTV (See  
Connecting aTV), and yourTV is turned on and  
set to video-in channel (See Setting up theTV).  
Press DISC MENU to toggle between PBC  
ON and PBC OFF.  
2 Press SOURCE on the system once or more  
to select DVD mode ( or DISC on the remote  
control).  
Playing a disc with PBC function  
If PBC OFF, the system will start playback  
automatically.  
You should see the blue Philips DVD  
background screen on theTV.  
If PBC ON, the PBC menu (if available) will  
appear on theTV screen for selection. Use the  
numeric keys (0-9) to enter your choice.  
3 Push OPEN/CLOSE on the top of the system  
to open the disc tray.  
4 Insert a disc with the print side facing up and  
Note:  
close the disc tray.  
– This function is not available for DVD/CD/MP3/  
DivX disc.  
5 Playback will start automatically (depending on  
the disc type).  
If a disc menu appears on theTV, see “Using  
the Disc Menu”.  
If the disc is locked by parental control, you  
must enter your six-digit password. (See  
“Changing the password”).  
Resuming playback  
During playback, press 9 once to stop the  
playback in resume mode, then press ÉÅ to  
start playback from where you have stopped.  
To cancel the resume mode  
To interrupt playback  
Press ÉÅ.  
Å” is displayed on theTV screen.  
In the stop position, press 9 again to fully stop  
the playback. Or open the disc door, or switch  
the system to standby mode.  
To resume playback, press ÉÅ again.  
Selecting and searching  
To stop playback  
Press 9.  
Selecting a different track/chapter  
For DVD/VCD/CD/MP3:  
During playback, briefly press ¡ / to select the  
previous or next track/chapter.  
Using the Disc Menu  
1 Press DISC MENU on the remote control.  
If the current title has a menu, the menu will  
appear on the screen. Otherwise, the disc menu  
will be displayed.  
Or,  
use the Numeric Keypad (0-9) on the  
remote control to directly input your track  
number.  
After selecting, playback will automatically  
start from the beginning of the selected track.  
2 Press à / á / 4 / 3 to select the desired title  
or chapter, and then press ÉÅ or OK.  
Playback starts from the selected title or  
chapter.  
Helpful hints:  
3 Press DISC MENU on the remote control to  
SomeVCDs have a single track, so track  
selecting or an invalid input value for the current  
disc will be ignored.  
go to disc menu of the disc.  
Note:  
If the player has been set to repeat chapter  
– If no title menu or root menu is recorded in the  
DVD disc, pressing this button will restart playback  
from the first track.  
(track), pressing this button will replay the same  
chapter (track) from its beginning.  
22  
 
Disc Operations  
ForVCDs/SVCDs/CDs  
Fast forwarding/reversing  
REPEATTRACK:Repeats the current track  
REPEAT ALL: Plays all the tracks repeatedly  
SHUFFLE: Random play  
For DVD/VCD/DivX/WMA/MP3:  
1 During playback, press à / á repeatedly to  
select fast search speed in forward or reverse  
playback.  
REPEAT OFF: Switchs off play mode  
For MP3/WMA/JPEG/DivX  
2 To resume to normal playback, pressÉÅ.  
REPEAT ONE: Repeats the current track  
REPEAT ALL: Plays all the tracks repeatedly  
SHUFFLE: Random play  
Or, press à / á repeatedly until “É” is  
displayed on theTV screen.  
REPEAT OFF: Switchs off play mode  
Helpful hints:  
Fast searching forward/backward is available  
only within the same track.  
To return to normal playback, press MODE  
repeatedly until various play modes are no  
longer displayed.  
In shuffle playback mode:  
Slow forwarding/reversing  
Press button to select another track in a  
shuffle order.  
For DVD/VCD:  
1 During playback, press 3 / 4repeatedly to  
select slow search speed in forward or reverse  
playback.  
Press 9 to stop shuffle playback.  
2 To resume to normal playback, press ÉÅ.  
To cancel Shuffle mode:  
Or, press 3 / 4 repeatedly until “É” is  
displayed on theTV screen.  
Press MODE repeatedly to select repeat off to  
cancel Shuffle mode.  
Helpful hints:  
ForVCD, slow reverse is unavailable.  
Notes:  
– In Tuner or AUX mode, this button does not  
function.  
– When the disc tray is opened, Shuffle/Repeat  
function will be cancelled automatically.  
Different play modes:REPEAT,  
SHUFFLE and REPEAT A-B  
REPEAT  
Repeat A-B  
For DVDs/VCD/CD/MP3  
You can play a specific section in a chapter/track  
repeatedly.  
During playback, press repeatedly MODE on  
the system to choose desired repeat play modes.  
ForVCD with PBC feature, PBC must be  
turned off first.  
1 Press REPEAT A-B at your chosen start point.  
2 Press REPEAT A-B again at your chosen end  
point.  
The passage will now repeat continuously.  
For DVDs  
CHAPTER REPEAT: Repeats the current  
chapter  
3 To resume normal play, press REPEAT A-B  
again.  
TITLE REPEAT: Repeats the current title  
REPEAT ALL: Plays all the content repeatedly  
SHUFFLE: Random play  
Note:  
– The A-B function can only be set within the  
same chapter or track.  
REPEAT OFF: Switches off play mode  
23  
 
Disc Operations  
PROG to remove it from programme playlist.  
5 Press STOP to stop program playback .  
6 Press DISC MENU return to disc menu.  
Programming favourite  
chapters/tracks  
You can play the contents of the disc in the  
order you want.  
Notes:  
– At most 20 tracks can be stored for DVD/VCD/  
SVCD/CD/CDG.  
– At most 100 tracks can be stored for MP3/  
WMA/JPEG.  
For DVD/VCD/SVCD/CD/CDG  
1 Press PROG on the remote control.  
The programming menu appears.  
Display information  
In disc mode, press DISPLAY/CLOCK  
repeatedly to select the following display  
information.  
12  
2 Use the numeric keys (0-9) to input the track  
/chapter number in the order you want. (two  
digits must be entered, e.g., 06 ).  
Menu  
If there are more than ten tracks to be  
programmed in total, select {NEXT} on the  
screen and press OK (or press 3I on the  
remote control) to access the next programming  
page.  
To remove the track/chapter from the  
programming menu, select the track/chapter and  
press OK.  
Moving to another title/chapter  
Some discs may contain more than one title or  
chapter. If the disc has a title or chapter menu  
recorded on it, you can start playback from the  
selected item.  
3 Select {Start} to play the program.  
4 To stop playback, press 9 once.  
1 Press DISPLAY/CLOCK to display the  
message of title and chapter.  
5 To exit the program mode, press 9 twice.  
2 Use 4 / 3 to highlight an item and press OK.  
For MP3/WMA/JPEG  
3 Use numeric keys (0-9) to select a desired  
1 Press 4 / 3 to select a track/picture on the disc  
menu.Then press PROG to add the track/  
picture to playlist.  
title/chapter number.  
4 Press DISPLAY/CLOCK to exit the disc  
”AddTo Playlist” will show on the disc menu.  
information menu.  
2 Press DISC MENU three times.  
Note:  
playlist menu will appear.  
– Selecting a title or chapter might not be possible  
on certain discs.  
3 Press 4 / 3 to select a track/picture on the disc  
menu.Then press PROG to add the track/  
picture to playlist.  
4 Press 4 / 3 to select a track/picture and press  
OK to start playback.  
You can select a track/picture and press  
24  
 
Disc Operations  
Viewing from another angle  
SUBTITLE  
Press repeatedly SUBTITLE on the remote  
control to select different subtitle languages.  
The feature is disc dependant.  
If the playing DVD disc is recorded with multiple  
camera angles, this function allows you to view  
the picture from different angles.Angle selection  
is determined by the disc format.  
Playing MP3/Picture disc (Kodak,  
JPEG)  
1 Press DISPLAY/CLOCK on the remote  
control to display the message of title and  
chapter.  
IMPORTANT!  
You have to turn on yourTV set and  
set to the correctVideo In channel.  
2 Use 4 / 3 to highlight “Angle” and press OK.  
3 Use numeric keys (0-9) to select desired  
MP3/JPEG Picture disc  
angle.  
Or, you may directly press ANGLE to change  
the views from different angles.  
1 Load an MP3/Picture (JPEG) disc.  
The disc reading time may exceed 30  
seconds due to complexity of the directory/file  
configuration.  
ZOOM  
Zooming allows you to enlarge the video/ JPEG  
image during playback.  
The disc menu appears on theTV  
2 Select a track in the menu and press OK to  
start playback.  
For MP3/WMA, playback will start automatically.  
For DVDs/VCDs  
Press ZOOM repeatedly to change the  
zooming scale.  
2X -->3X -->4X -->1/2X-->1/3X--> 1/4X  
For JPEG  
(MP3 disc menu)  
Press ZOOM repeatedly to change the  
zooming scale.  
100% -->125%-->150%-->200%-->75%-->50%  
To pan through the enlarged image, press 5  
/6 / 3 / 4 buttons.  
Press ZOOM repeatedly to exit ZOOM mode.  
3 During music playback, press 3 / 4 or use the  
numeric keys (0-9) to select a desired picture  
file from the disc menu and press OK.  
AUDIO  
For DVDs  
On the remote control, press AUDIO  
repeatedly to select the desired language for  
sound track.  
If the disc main menu contains various folders,  
use 3 / 4 to select a desired folder, and press  
OK to open the folder.  
The feature is disc dependant.  
4 Press ¡ / to select previous/next track.  
5 To stop simultaneous playback, press DISC  
ForVCDs  
MENU followed by STOP.  
Press AUDIO repeatedly to select the audio  
channel for sound output displayed on theTV  
screen.  
STEREO, MONO LEFT, MONO RIGHT  
or MIX MONO.  
25  
 
Disc Operations  
If the MP3 menu is switched off  
While in playback mode, press ¡ or to select  
Kodak Picture disc  
1 Load a Kodak Picture disc.  
The disc reading time may exceed 30  
seconds due to complexity of the directory/file  
configuration.  
the previous/next track.  
Note:  
– No album search function in menu off mode.  
2 During playback, press 9.  
12 thumbnail pictures will appear on theTV  
screen.  
6 During JPEG or Kodak Picture disc playback,  
press PROG repeatedly to select different scan  
effect. There are 16 types of scan effect for  
selection. The selected scan effect will be  
displayed on theTV screen.  
(example for picture disc menu)  
Playing MP3 music and JPEG  
pictures simultaneously  
You can create a musical slide show if the disc  
contains both the MP3 music and JPEG picture  
files.  
1 Insert a MP3/WMA disc that contains music and  
pictures.  
2 Select a track in the menu and press OK to  
3 Press ¡ / to view the previous/next page (if  
start playback.  
available).  
3 During music playback, press 4 / 3 keys to  
select a desired picture file from the disc menu  
and press OK.  
4 Press à / á / 4 / 3 to move within the menu  
and press OK to select the desired picture to  
play.  
The picture files will be played back through  
to the end of the folder.  
The music keeps playing back and will be  
repeated when reaching the end of the selected  
album, playlist or track.  
5 Press PROG to select the slide-show mode.  
During playback, you can:  
Press ¡ or to select another title/picture in the  
current folder.  
4 To stop simultaneous playback, press DISC  
MENU followed by STOP.  
Press 5 / 6 / 5 / 4 on the remote control  
to rotate or flip the picture files.  
Press ZOOM repeatedly to zoom the picture in  
and out.  
Press 2;to pause/resume playback.  
Notes:  
– Due to the recording nature of Digital Audio  
MP3 (DAM), only digital audio music will play.  
– It is normal to experience an occasional “skip”  
while you are listening to your MP3 discs.  
– For multi-session discs with different formats,  
only the first session can be read and played.  
26  
 
Disc Operations  
Playing a Divx disc  
The unit supports the playback of Divx movies  
which you can copy from your computer onto a  
recordable disc. See {DVD Menu Operations} -  
Divx(R)VOD Code for details.  
1 Insert a Divx disc.  
2 Use à / á / 4 / 3 keys to navigate to the title  
you want to play.  
3 Press OK to start playback.  
During playback:  
If the Divx disc has multilingual subtitles, you can  
press SUBTITLE on the remote control to  
change the subtitle language.  
If the Divx disc has different audio tracks, you  
can press AUDIO on the remote control to  
change the audio stream.  
Press 5 / 6 keys on the remote control to  
perform fast reverse and forward.  
Press DISPLAY/CLOCK repeatedly until the  
time search menu appears, key in he time where  
playback should start.  
Playback skips to the time entered.  
Helpful Hints:  
– Subtitle files with the following file name  
extensions(.srt, .smi, .sub, .ssa, .ass) are supported  
but do not appear on the file navigation menu.  
– The subtitle file name has to be the same as the  
file name of the movie.  
– The subtitle can only be displayed up to an  
average of 45 characters.  
27  
 
System Menu Options  
Screen Saver  
Basic operations  
This function is used to turn the screen saver on  
or off.  
1 Press SYSTEM MENU to enter the Setup  
Menu.  
2 Press à/á to select a page to be set.  
3 Press 5/4to highlight an option.  
DIVXVOD  
Philips provides you with the Divx(R)VOD  
registration code that allows you to rent or  
purchase videos from Divx(R)VODE service at  
www.divx.com/vod.All the downloaded videos  
from Divx(R)VOD can only be displayed back  
on this unit.  
4 Enter its submenu by pressing á or OK.  
5 Move the cursor by pressing 5/4to highlight  
the selected item.  
In cases of value setting. press 5/4 to adjust  
values.  
Press á or OK to enter its submenu, then  
press OK again to see the registration code.  
6 Press OK to confirm.  
Div  
To return to the upper-level menu  
Audio Setup Page  
Press à.  
The options included in Audio Setup Page are:  
“Night Mode”,“Digital Output” and “Dolby  
Digital Setup”.  
To exit from the menu  
Press SYSTEM MENU again.  
The settings will be stored in the player’s  
memory even if the player is switched off.  
Note:  
– Some of the features in the System Menu  
Options are described in “Getting Started”.  
General Setup Page  
The options included in General Setup Page are:  
“OSD Lang”, “Screen Saver” and “DivxVOD”.  
Night Mode  
On: Select this to level out the volume. High  
volume outputs will be softened and low volume  
outputs are brought upward to an audible level.  
Off: Select this when you want to enjoy the  
surround sound with its full dynamic range.  
This feature is only available for movies with  
Dolby Digital mode.  
Digital Output  
OSD Lang  
Digital Off:Turns off the digital output.  
Digital / Raw: If you have connected your  
DIGITAL OUT (COAXCIAL or OPTICAL) to a  
multi-channel decoder/receiver.  
See "Getting Started-Step 3: Setting language  
preference" for details.  
SPDIF / PCM: Only if your receiver is not  
capable of decoding multi-channel audio.  
28  
 
System Menu Options  
Dolby Digital Setup  
Video Setup Page  
The options included in the Dolby Digital Setup  
page is:“Dynamic”.  
The options included inVideo Setup Page are:  
"TV Display" ,Progress” and "TVType".  
– – Audio Setup Page – –  
NIGHT MODE  
DIGITAL Output  
Dolby Digital Setup  
Dynamic  
TV Display  
Optimises the dynamic sound output. High  
volume outputs are softened, enabling you to  
watch your favourite movie without disturbing  
others.  
Set the aspect ratio of the DVD Player according  
to theTV you have connected.  
4:3 (panscan): If you have a normalTV and  
want both sides of the picture to be trimmed or  
formatted to fit yourTV screen.  
– – Dolby Digital Page – –  
Dynamic  
4:3 (letterbox): If you have a normalTV. In  
this case, a wide picture with black bands on the  
upper and lower portions of theTV screen will  
be displayed.  
The levels for dynamic selection: FULL, 3/4, 1/  
2, 1/4 and OFF.  
Note:  
– DTS surround audio output is not available in  
this DVD player.  
16:9: If you have a wide-screenTV.  
29  
 
System Menu Options  
The rating levels are from 1 to 8 and are country  
dependent.You can prohibit the playing of  
certain discs that are not suitable for your  
children or have certain discs played with  
alternative scenes.  
Progress  
See "Getting Started-Step 2: Setting up theTV"  
for details.  
TVType  
See "Getting Started-Step 2: Setting up theTV"  
for details.  
– – Preference Page – –  
Audio  
1 KID SAF  
2 G  
Subtitle  
Preference Page  
Disc Menu  
Parental  
Password  
Divx Subtitle  
Default  
3 PG  
4 PG 13  
5 PGR  
6 R  
The options included in Preference Page are:  
"Audio", "Subtitle",Disc Menu”,Parental”,  
“Password”,“Divx Subtitle” and "Default".  
7 NC 17  
8 ADULT  
– – Preference Page – –  
Audio  
VCD, SVCD and CD have no level indication, so  
parental control function has no effect on those  
kinds of discs.This applies to most illegal DVD  
discs.  
Subtile  
Disc Menu  
Parental  
Password  
Divx Subtitle  
Default  
1 Press 5/4 to highlight “Parental”.  
2 Enter its submenu by pressing á.  
3 Use 5/4 to highlight a rating level for the disc  
inserted.  
Audio  
DVDs that are rated above the level you  
selected will not play unless you enter your four-  
digit password and choose a higher level rating.  
See "Getting Started-Step 3: Setting language  
preference" for details.  
Subtitle  
Note:  
See "Getting Started-Step 3: Setting language  
– Some DVDs are not encoded with a rating  
though the movie rating may be printed on the  
Disc cover.The rating level feature does not work  
for such Discs.  
preference" for details.  
Disc Menu  
See "Getting Started-Step 3: Setting language  
preference" for details.  
Rating explanations  
1 KID SAFE  
– Suitable for children.  
Parental  
2 G  
Some DVDs may have a parental level assigned  
to the complete disc or to certain scenes on the  
disc.This feature lets you set a playback limitation  
level.  
– General Audience; recommended as  
acceptable for viewers of all ages.  
3 PG  
– Parental Guidance suggested.  
30  
 
System Menu Options  
4 PG 13  
4 Enter your new four-digit password using  
– Material is unsuitable for children under age  
13. Parental Guidance suggested.  
Numeric Keypad (0-9).  
5 Enter the new password again for confirmation.  
5-6 PG-R, R  
– Parental Guidance – Restricted;  
recommended that parents restrict children  
under 17 from viewing or allow them to view  
only when supervised by a parent or adult  
guardian.  
6 Press OK to confirm and the new password  
takes effect.  
Note:  
– The default password (1234) is always active  
even if the password has been changed.  
7 NC-17  
– No children under age 17; not recommended  
for children under age 17.  
Divx Subtitle  
8 ADULT  
Select the font type that supports the recorded  
Divx subtitle.  
Standard: Display a standard list of Roman  
subtitle fonts provided by this unit.  
Central Europe: Display Central Europe  
fornts.  
– Material for adults only; viewed only by adults  
due to graphic sexual scenes, violence, or  
language.  
Password  
Cyrillic: Display Cyrillic font.  
You can enter your four-digit password to  
activate or deactivate rating control.  
Default  
Setting the “Default” function will reset all  
options and your personal settings to the factory  
defaults and all your personal settings will be  
erased.  
– – Preference Page – –  
Audio  
Subtitle  
Disc Menu  
Parental  
Password  
Divx Subtitle  
Default  
Change  
– – Preference Page – –  
Audio  
Subtitle  
Disc Menu  
Parental  
Password  
To change password  
Divx Subtitle  
Default  
Reset  
1 Move to "Password" and press á or OK to  
enter its submenu.  
2 Press OK to enter the menu below.  
1 Press 5/4 to highlight “Default”.  
2 HighlightReset” by pressing á.  
3 Press OK to confirm selection.  
PWD  
OK  
Caution!  
– When this function is activated, all  
settings will be reset to factory defaults.  
3 Use the Numeric Keypad (0-9) to enter your  
four-digit code.  
The password supplied by default is 1234.  
31  
 
Radio Reception  
Manual programming  
1 Tune to your desired station (seeTuning to radio  
stations).  
2 Press PROG on the remote control to activate  
programming.  
PROG flashes in the display.  
3 Press í/ ë to allocate a number from 1 to 20  
to this station.  
4 Press PROG on the remote control again to  
confirm the setting.  
D
7
PROG disappears.The preset number and the  
frequency of the preset station are shown.  
Tuning to radio stations  
5 Repeat the above four steps to store other  
stations.  
1 Press SOURCE on the set (or FM on the  
remote control ) repeatedly until FM is displayed.  
You can override a preset station by storing  
another frequency in its place.  
2 Press down on TUNING à / á (or à / á  
on the remote control) and release the button.  
The radio automatically tunes to a station  
with sufficient reception. Display indication during  
automatic tuning: SEARCH.  
Tuning to preset radio stations  
Press í/ ë until the desired preset station is  
displayed.  
3 Repeat step 2 if necessary until you find the  
desired station.  
To tune to a weak station, press TUNING à /  
á (or à / á on the remote control) briefly  
and repeatedly until you have found optimal  
reception.  
Programming radio stations  
You can store up to a total of 20 FM radio  
stations in the memory.  
Automatic programming  
Autostore automatically starts programming  
radio stations from preset 1.Any previous  
presets e.g. manually programmed will be erased.  
In tuner mode, press and hold PROG until  
“AUTO” appears on the display panel.  
All previously stored radio stations will be  
replaced.  
32  
 
USB Connection  
Playing a USB mass storage device  
Using USB connectivity  
1 Make sure that your MCD177 is being powered  
on.  
2 Plug a compatible USB mass storage device to  
MCD177 is fitted with a USB port in the front  
panel, offering a plug and play feature which  
allows you to play, from your MCD177 , digital  
music and spoken contents stored on a USB  
mass storage device.  
MCD177 ’s USB port marked  
. If needed,  
use a suitable USB cable to connect between  
the device and MCD177 ’s USB port.  
The device will automatically power on.  
If the device is not powered on, turn on the  
power manually, then re-connnect it.  
Using a USB mass storage device, you can also  
enjoy all the features offered by MCD177 which  
are explained and instructed in the sections of  
disc operation.  
3 Press SOURCE repeatedly (or USB on the  
remote) to enter USB mode.  
Compatible USB mass storage devices  
With the MCD177, you can use  
NO AUDIOappears if no audio file is found  
in the USB device.  
– USB flash memory (USB 2.0 or USB 1.1)  
– USB flash player (USB 2.0 or USB 1.1)  
• USB device which requires driver  
installation under Windows XP is not  
supported.  
4 Press 2;on your MCD177 to start play.  
To use other playback features, see the section  
of CD/MP3 Operation.  
Helpful hints:  
Note:  
– Make sure that file names of MP3 files end  
with .mp3. and the file names ofWMA files end  
with .wma.  
– For DRM protectedWMA files, useWindows  
Media Player 10 (or later) for conversion.Visit  
Media Player andWM DRM (Windows Media  
Digital Rights Management).  
– In some USB flash players (or memory devices),  
the stored contents are recorded using copyright  
protection technology. Such protected contents will  
be unplayable on any other devices (such as  
MCD177 device).  
Supported formats:  
– USB or memory file format FAT12, FAT16,  
FAT32 (sector size: 512 - 4096 bytes)  
– MP3 bit rate (data rate): 32-320 kbps and  
variable bit rate  
– For USB device playing, if the display shows  
"OL", it means that the USB device is  
electrically overloading MCD177.You need to  
change a USB device.  
– WMA v9 or earlier  
– Directory nesting up to a maximum of 8  
levels  
– Number of albums: maximum 99  
– Number of tracks: maximum 800  
– ID3 tag v2.0 or later  
– File name in Uicode UTF8 (maximum length:  
128 bytes  
The system will not play or support the  
following:  
• Empty albums: an empty album is an album  
that does not contain MP3/WMA files, and  
will not be shown in the display.  
• Non-supported file formats are skipped.This  
means that e.g.:Word documents .doc or  
MP3 files with extension. dlf are ignored and  
will not be played.  
• AAC, WAV, PCM. NTFS audio files  
• DRM protected WMA files  
• WMA files in Lossless format  
33  
 
USB Connection  
INFORMATION REGARDING USB DIRECT:  
1. Compatibility of the USB connection on this  
micro system:  
a)This micro system supports most USB Mass  
storage devices (MSD) that these devices are  
compliant to the USB MSD standards.  
i) Most common Mass storage class  
devices are flash drives, memory sticks, jump  
drives and etc.  
ii) If you see a "Disc Drive" showing up on  
your computer after you have plugged the mass  
storage device into your computer, most likely it  
is MSD compliant and it will work with this  
micro system.  
b) If your Mass storage device requires a  
battery/power source, please make sure you  
have a fresh battery in it or charge the USB  
device first and then plug it into the micro  
system again.  
2. Supported Music type:  
a)This device only supports unprotected music  
with file extension: .mp3 .wma  
b) Music bought from on-line music stores are  
not supported because they are secured by  
Digital Rights Management protection (DRM).  
c) File name extensions that ended with the  
following are not supported: .wav; .m4a; .m4p;  
.mp4; .aac and etc.  
3. No Direct connection can be made from a  
Computer USB port to the micro system even  
you have either or both mp3 or wma file in your  
computer.  
34  
 
Clock/Timer  
2 Press DISC, USB or TUNER to select the  
Viewing clock  
The clock (if it is set) is shown in normal standby  
mode.  
desired source.  
Before setting timer, make sure the music source  
has been prepared.  
To view the clock in any sound source  
(CD or FM for example )  
Press briefly DISPLAY/CLOCK (or CLOCK  
on the remote control ).  
DISC – load the disc.  
TUNER – tune to the desired radio station.  
USB – connect a USB device.  
3 Press TUNING à / á (or à / á on the  
remote) to set the hours.  
Setting clock  
1 In standby mode, press and hold DISPLAY/  
CLOCK.  
4 Press í/ ë to set the minutes.  
5 Press SLEEP/TIMER to store the time.  
At the preset time, the selected source will play.  
The clock digits flash on the display panel.  
If the clock has not been set, "00: 00" flashes  
To deactivate the wake-up timer  
2 Press TUNING à / á (or à / á on the  
In standby mode, press SLEEP/TIMER until  
“TIMER OFF” is displayed on the panel.  
remote) to set the hours.  
3 Press í/ ë to set the minutes.  
Notes:  
4 Press PROG to select between 12 hour and 24  
– The system will exit timer setting mode if no  
button is pressed within 90 seconds.  
hour display.  
5 Press DISPLAY/CLOCK agian to store the  
setting.  
– Display shows  
deactivated.  
if activated, and disappears if  
The clock starts working.  
Setting sleep timer  
Notes:  
The sleep timer enables the system to switch off  
by itself after a set period of time.  
– The clock setting will be erased when the system  
is disconnected from the power supply.  
– The system will exit clock setting mode if no  
button is pressed within 90 seconds.  
– To exit clock setting without storing, press STOP  
on the system to exit.  
1 During playback, press SLEEP/TIMER on the  
remote control repeatedly to select sleep  
options.  
The selections are as follows (time in  
minutes):  
15 30456090120OFF  
Setting wake-up timer  
The system can switch on to DISC,TUNER or  
USB mode automatically at a preset time, serving  
as an alarm to wake you up.  
2 Press SLEEP/TIMER until you reach the  
desired length of time.  
To deactivate the sleep timer  
IMPORTANT!  
– Before setting the timer, ensure that  
the clock is set correctly.  
To set a new timer, you need to  
deactivate the previously set timer.  
Press SLEEP/TIMER repeatedly until "OFF" is  
displayed, or press the STANDBY ON y  
button.  
1 In standby mode, press and hold SLEEP/  
TIMER on the remote for more than 2 seconds  
to enter timer setting mode.  
The source and timer digits will be lighted on  
the display panel.  
00: 00“ will be displayed briefly if wake-up  
timer is not set.  
35  
 
Specifications  
AMPLIFIER  
USB PLAYER  
Output power  
L/R speakers.............................20 W /channel RMS  
Speaker channel  
Frequency Response .......................................................  
........................................... 200 Hz - 18 kHz / 3 dB  
Signal-to-Noise Ratio ...... > 60dB (A-weighted)  
Input Sensitivity  
AUX In.................................................................. 500 mV  
Output Sensitivity  
USB ................................................................. 12 Mb/s,V1.1  
......................................... support MP3 and WMA files  
Number of albums/folders .................maximum 99  
Number of tracks/titles...................... maximum 800  
Main unit  
Power Supply Rating ........... 100 -240V, 50/60 Hz  
Power Consumption  
Active .......................................................................... 30 W  
Eco-power standby .............................................<1W  
Dimensions (w x h x d) ....232 x 85 x 275 (mm)  
Weight...........................................................................1.24kg  
Package Dimension (w x h x d)..................................  
...................................................... 554 x 405 x 225 (mm)  
Gross weight...................................................................4 kg  
Line Out(1KHZ 0dB) ................................. 2 + 0.2V  
TUNER  
Tuning Range .............................. FM 87.5 – 108 MHz  
Signal-to-Noise Ratio ................................ FM 50 dB  
DVD  
SPEAKERS  
LaserType ................................................ Semiconductor  
Disc Diameter.............................................. 12cm / 8cm  
Video Decoding........................... MPEG-2 / MPEG-1  
Video DAC ................................................................ 12 Bits  
Signal System ............................................... PAL / NTSC  
Video Format ..................................................... 4:3 / 16:9  
Video S/N........................................... 56 dB (minimum)  
CompositeVideo Output ................ 1.0Vp-p, 75 Ω  
S-Video Output .......................... Y - 700Vp-p, 75 Ω  
.............................................................. C - 300Vp-p, 75 Ω  
Audio DAC .......................................... 24 Bits / 96 kHz  
System ................................................... 1-way, Bass reflex  
Impedance........................................................................ 4 Ω  
Speaker drivers.............................................. 3’’ fullrange  
Frequency response ........................ 80 Hz – 20 kHz  
Dimension (w x h x d).. 160 x 250 x 180 (mm)  
Weight................................................................ 1.8 kg each  
Specifications and external appearance are  
subject to change without notice.  
36  
 
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will invalidate the  
warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair. If you  
are unable to remedy a problem by following these hints, consult your dealer or Philips for  
help.  
Problem  
Solution  
No power.  
Check if the AC power cord is properly  
connected.  
Press STANDBY ONB on the DVD System or  
source buttons on the remote to turn on the  
power.  
No picture.  
Check if theTV is switched on.  
Check the video connection.  
Press SOURCE on the DVD player repeatedly to  
selectDVD” or press DISC on the remote.  
Set yourTV to the correctVideo In channel.This  
channel is usually near channel 00. Or, you may  
have a button on theTV remote control that  
selects Auxiliary or A/V IN channel. See yourTV  
owner’s manual for details. Or, change channels at  
theTV until you see DVD screen on theTV.  
If the progressive scan feature is activated but the  
connectedTV does not support progressive  
signals or the cables are not connected  
accordingly, see “Getting Started-Setting up  
Progressive Scan feature (for Progressive ScanTV  
only)” for proper progressive scan setup or  
deactivate the progressive scan feature as below:  
1)Turn off yourTV progressive scan mode or  
turn on to interlaced mode.  
2) SelectOFF” in PROGRESSIVE menu of  
system setup menu to turn off progressive, then  
press SYSTEM MENU to exit the menu.  
Distorted or poor picture.  
Sometimes a small amount of picture distortion  
may appear.This is not a malfunction.  
Clean the disc.  
Completely distorted picture or black/  
white picture.  
TV has a colour system standard. If the disc’s or  
DVD system’s colour system is different than  
yourTV’s colour system, the picture may be  
distorted or colourless.  
37  
 
Troubleshooting  
The aspect ratio of the screen cannot be  
changed even though you have set theTV  
shape.  
The aspect ratio is fixed on the DVD disc.  
Depending on theTV, it may not be possible to  
change the aspect ratio.  
No sound or distorted sound.  
Adjust the volume.  
Check that the speakers are connected correctly.  
Replace the speaker cables.  
Disconnect the headphones.  
The system is in pause, slow motion or fast  
forward/reverse mode, press ÉÅ (or ÉÅ  
on the remote) to resume normal play mode.  
The micro DVD player does not start  
playback.  
Insert a readable disc with the playback side  
facing down.  
Check the disc type, colour system and regional  
code. Check for any scratches or smudges on  
the disc.  
Press SYSTEM MENU to turn off the setup  
menu screen.  
Cancel the parental control rating function or  
change the rating level.  
Moisture has condensed inside the system.  
Remove the disc and leave the system turned on  
for about an hour.  
The DVD micro system does not respond Disconnect the power plug from the outlet and  
when the buttons are pressed.  
insert again.  
Cannot activate some features, such as  
Subtitles, or multi-language Audio.  
Multi-language sound or subtitle is not recorded  
on the DVD.  
Changing the language for the sound or subtitle  
is prohibited on the DVD.  
The features may not be available on the disc.  
Radio reception is poor.  
The timer is not working.  
If the signal is too weak, adjust the antenna or  
connect an external antenna for better  
reception.  
Increase the distance between the Mini HiFi  
System and yourTV orVCR.  
Set the clock correctly.  
38  
 
Troubleshooting  
The Clock/Timer setting is erased.  
Power has been interrupted or the power cord  
has been disconnected. Reset the clock/timer.  
The remote control does not function.  
Select the correct source (DISC or AUX for  
example) before pressing the function button.  
Point the remote control at the remote sensor  
of the unit.  
Reduce the distance to the player.  
Remove any possible obstacles.  
Replace the battery with new one.  
Check that the battery is loaded correctly.  
Low hum or buzz sound.  
Place the DVD micro system as far away as  
possible from electrical devices (such as  
speakers,TV) that may be causing interference.  
Low bass response.  
Check all speakers for correct polarity.  
Unable to select Progressive Scan  
Check that the output of the video signal is  
switched to 'Ypbpr'.  
39  
 
Glossary  
Analog: Sound that has not been turned into  
numbers.Analog sound varies, while digital sound  
has specific numerical values.These jacks send  
audio through two channels, the left and right.  
Parental control: A function of the DVD to  
limit playback of the disc by the age of the users  
according to the limitation level in each country.  
The limitation varies from disc to disc; when it is  
activated, playback will be prohibited if the  
Aspect ratio: The ratio of vertical and  
horizontal sizes of a displayed image.The  
horizontal vs. vertical ratio of conventionalTVs. is  
4:3, and that of wide-screens is 16:9.  
software’s level is higher than the user-set level.  
PCM (Pulse Code Modulation): A system  
for converting analog sound signal to digital  
signal for later processing without data  
compression.  
AUDIO OUT Jacks: Jacks on the back of the  
DVD System that send audio to another system  
(TV set, Stereo, etc.).  
Playback control (PBC): Refers to the signal  
recorded on video CDs or SVCDs for  
reproduction control. By using screen menus  
recorded on aVideo CD or SVCD that supports  
PBC, you can enjoy interactive-type software as  
well as software having a search function.  
Bit Rate: The amount of data used to hold a  
given length of music; measured in kilobits per  
second, or kbps. Or, the speed at which you  
record. Generally, the higher the bit rate the  
better the sound quality. However, higher bit  
rates use more space on a Disc.  
Progressive Scan (P-Scan): It displays all the  
horizontal lines of a picture at one time, as a  
signal frame. This system can convert interlaced  
video from DVD into progressive format for  
connection to a progressive display. It  
dramatically increases the vertical resolution. A  
progressive scanTV set is needed to receive  
progressive scan output from the system.  
Chapter: Sections of a picture or a music  
piece on a DVD that are smaller than titles.A  
title is composed of several chapters. Each  
chapter is assigned a chapter number enabling  
you to locate the chapter you want.  
ComponentVideo Out Jacks: Jacks on the  
back of the DVD System that send high-quality  
video to aTV set that has ComponentVideo In  
jacks (R/G/B, Y/Pb/Pr, etc.).  
Region code: A system allowing discs to be  
played only in preset regions.This unit will only  
play discs that have compatible region codes.You  
can find the region code of your unit from the  
product label. Some discs are compatible with  
more than one region (or ALL regions).  
Disc menu: A screen display prepared for the  
selection of images, sound, subtitles, multi-angles,  
etc recorded on a DVD.  
Digital: Sound that has been converted into  
numerical values. Digital sound is available when  
you use the DIGITAL AUDIO OUT COAXIAL  
or OPTICAL jacks.These jacks send audio  
through multiple channels, instead of just two  
channels as analog does.  
S-Video: Produces a clear picture by sending  
separate signals for luminance and the color.You  
can use S-Video only if yourTV set has S-Video  
In jack.  
Sampling Frequency: Frequency of data  
sampling when analog data is converted to  
digital data. Sampling frequency numerically  
represents how many times the original analog  
signal is sampled per second.  
Dolby Digital: A surround sound system  
developed by Dolby Laboratories containing up  
to six channels of digital audio (front left and  
right, surround left and right and center).  
Surround: A system for users to create  
realistic three-dimensional sound fields full of  
realism by arranging multiple speakers around  
the listener.  
JPEG: A still-picture data compression system  
proposed by the Joint Photographic Expert  
Group, which features small decrease in image  
quality in spite of its high compression ratio.  
Title: The longest section of a picture or music  
feature on DVD, music, etc., in video software, or  
the entire album in audio software. Each title is  
assigned a title number enabling you to locate  
the title you want.  
MP3: A file format with a sound data  
compression system,MPEis the abbreviation of  
Motion Picture Experts Group 1 (or MPEG-1)  
Audio Layer 3.Through the MP3 format, one  
CD-R or CD-RW can contain about 10 times as  
much data volume as a regular CD can.  
Multichannel: DVD is specified to have all  
sound tracks constitute one sound field.  
Multichannel refers to a structure of sound  
tracks having three or more channels.  
VIDEO OUT jack: Jack on the back of the  
DVD System that sends video toTV.  
40  
 
AUSTRALIA -  
Philips ManufacturersWarranty for Australia only  
These warranty conditions are valid for the  
following consumer electronics products:  
ColourTelevisions, ProjectionTV, Plasma &  
LCDTV, Video Cassette Recorders, CD  
Recorders & Players, DVD Players, DVD  
Recorders, DVD Recorders with HDD,Audio  
Systems, HomeTheatre systems, Digital Set  
Top Box & Portable Audio products.  
Care Centre for free replacement of faulty accessories.  
8. This Manufacturers Warranty is neither transferable  
nor valid in countries other than Australia.  
This warranty does not cover:  
a) Mileage or travel outside the normal service area  
covered by selected Authorised Service Centre.  
b) Service costs arising from failure to correctly  
adjust the controls of the product or to observe the  
instructions, or inspections that reveal that the  
product is in normal working order.  
The benefits given to the purchaser by this  
warranty are in addition to all other rights  
and remedies which the purchaser has in  
respect of the product under theTrade  
PracticesAct or other Commonwealth or  
State Law.  
c) Product failures caused by misuse, neglect,  
accidental breakage, transit damage, inexpert repairs  
or modification by un-authorised persons, external  
fires, lightning strikes, floods, vermin infestation or  
liquid spillage.  
Philips Consumer Electronics warrants its products to  
the purchaser as follows and subject to the stated  
conditions.  
d) Cleaning of video or audio heads.  
1Year Free Repair Service - at Philips ASC  
e) Inadequate receiving antennae.  
f) Replacement of worn or used batteries or other  
ColourTelevision, PlasmaTelevision, LCDTelevision,  
ProjectionTelevsion, DVDR/VCR Combo, DVD  
Recorders with Hard Drive, LCD Projectors,Wireless  
Audio Systems,Audio Systems, HomeTheatre  
Systems & Digital Set-Top-Box.  
consumables.  
g) Consumer products used in commercial applications  
(This warranty is limited to 3 months only).  
h) Second hand products.  
1Year free Replacement – at your Retailer  
The conditions contained in this warranty  
card replace and override the provision of  
the Philips World-Wide Guarantee for  
products purchased in Australia and used in  
Australia.  
Portable Audio, MP3 Infotainment products,Video  
Cassette recorders, DVD Player, DVD/VCR Combo  
Player, DVD Recorder without HDD & Portable  
DVD/LCD players.  
Conditions of RepairWarranty  
Service is provided through more than 100  
accredited Authorised Service Centres throughout  
Australia. For direct contact with the nearest  
recommended Authorised Service Centre in capital  
& regional cities/towns  
1. All claims for warranty service should be made to  
your nearest Philips Authorised Service Centre or the  
PhilipsTechnology Care Centre. Reasonable evidence  
of date of purchase must be provided.  
Authorised Service Centre Network  
1300 361 392  
2. This warranty extends only to defects in material or  
workmanship occurring under normal use of the product  
when operated in accordance with the instructions.  
Customer support is provided in Australia by our  
trained call centre staff. For assistance with product  
features and specifications, please call  
3. If a replacement product is supplied under the repair  
policy it is warranted, under this warranty, for the  
remainder of the warranty of the original purchased  
product only.  
Technology Care Centre  
1300 363 391  
4. Home service is provided only within the normal  
service area of one of our recommended Authorised  
Service Centres (ASC). It will be provided for  
television receivers only with a screen side of 67cms  
or above (product includes CRT, LCDTV, PTV, and  
PlasmaTV).Televisions with screen side less than  
67cms and all other products types are to be taken or  
sent by the consumer to the workshop of your  
nearest Authorised Service Centre, at the Consumer’s  
expense.  
Please record the following information for  
your records and keep in a safe place.  
We recommend retaining your purchase  
receipt to assist with any warranty claim.  
Model number:....................................................  
Serial number:....................................................  
Date of purchase:....................................................  
Retailer:....................................................  
5. This Manufacturers Warranty is limited to 3 months  
for the above listed Consumer Electronics products if  
used in commercial applications.  
Philips Consumer Electronics  
6. Philips may, at its discretion choose to replace rather  
a division of Philips ElectronicsAustralia Limited  
ABN 24 008 445 743,  
than repair any product covered by this warranty.  
7. Product accessories are covered by the same  
Level 1, 65 Epping Road NORTH RYDE NSW 2113.  
warranty period. Please contact the PhilipsTechnology  
Warranty valid for all new products purchased after 1st January 2007  
 
41  
NEW ZEALAND - Guarantee and Service for New Zealand  
Thank-you for purchasing this quality Philips product.  
Philips New Zealand Ltd guarantees this product against defective components and faulty  
workmanship for a period of 12 months. Any defect in materials or workmanship occurring  
within 12 months from the date of purchase subject to the following conditions will be rectified  
free of charge by the retailer from whom this product was purchased.  
Conditions  
1. The product must have been purchased in New Zealand.As proof of purchase, retain the  
original sales docket indicating the date of purchase.  
2. The guarantee applies only to faults caused by defective components, or faulty workmanship  
on the part of the manufacturer.  
3. The guarantee does not cover failures caused by misuse, neglect, normal wear and tear,  
accidental breakage, use onthe incorrect voltage, use contrary to operating instructions,  
or unauthorised modification to the product or repair by an unauthorised technician.  
4. Reasonable evidence (in the form of a sales docket) must be supplied to indicate that the  
product was purchased no more than 12 months prior to the date of your claim.  
5. In the event of a failure, Philips shall be under no liability for any injury, or any loss or  
damage caused to property or products other than the product under guarantee.  
This guarantee does not prejudice your rights under common law and statute,  
and is in addition to the normal responsibilities of the retailer and Philips.  
How to claim  
Should your Philips product fail within the guarantee period, please return it to the  
retailer from whom it was purchased. In most cases the retailer will be able to  
satisfactorily repair or replace the product.  
However, should the retailer not be able to conclude the matter satisfactorily, or if you  
have other difficulties claiming under this guarantee, please contact  
The Guarantee Controller  
Philips New Zealand Ltd.  
4P.O. Box 41.021  
Auckland  
3 (09) 84 94 160  
(09) 84 97 858  
fax 3  
42  
 
Meet Philips at the Internet  
MCD177  
CLASS 1  
LASER PRODUCT  
Printed in China  
PDCC-JH-0811  
 

Pelco TV Mount LB1000DC User Manual
Pella Window 802X0104 User Manual
Philips CD Player US2 PH63020 User Manual
Philips Headphones SHB7000 User Manual
Philips Portable Radio AE 1495 User Manual
Planet Technology Network Card MAP 2105 User Manual
Polaroid Digital Camera PIC 300B User Manual
Power Acoustik Car Video System PD 710 User Manual
Prince Castle Mixer 9B3C User Manual
Promise Technology Network Card FASTTRAK SX4300 User Manual