Philips Laptop Docking Station DS3600 User Manual

Register your product and get support at  
DS3600  
EN User manual  
 
#ꢇ The USB socket is for data transmission  
only.  
#ꢇ Where the plug of the Direct Plug-in  
Adapter is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
1 Important  
#ꢇ Read these instructions.  
#ꢇ Heed all warnings.  
#ꢇ Follow all instructions.  
#ꢇ Do not use this apparatus near water.  
#ꢇ Do not block any ventilation openings.  
Install in accordance with the  
Warning  
# "ꢅꢚꢅꢆꢇꢆꢅꢁꢉꢚꢅꢇꢊꢋꢅꢇꢑꢌꢎꢄꢐꢓꢇꢉꢙꢇꢊꢋꢄꢎꢇꢌꢂꢂꢌꢆꢌꢊꢍꢎ!ꢇ  
# "ꢅꢚꢅꢆꢇꢂꢃꢌꢑꢅꢇꢊꢋꢄꢎꢇꢌꢂꢂꢌꢆꢌꢊꢍꢎꢇꢉꢐꢇꢉꢊꢋꢅꢆꢇꢅꢃꢅꢑꢊꢆꢄꢑꢌꢃꢇ  
equipment.  
# Ensure that you always have easy access to the power  
cord, plug or adaptor to disconnect the apparatus from  
the power.  
manufacturer’s instructions.  
#ꢇ Do not install near any heat sources such  
as radiators, heat registers, stoves, or  
ꢉꢊꢋꢅꢆꢇꢌꢂꢂꢌꢆꢌꢊꢍꢎꢇꢏꢄꢐꢑꢃꢍꢒꢄꢐꢓꢇꢌꢁꢂꢃꢄ\ꢅꢆꢎꢔꢇꢊꢋꢌꢊꢇ  
produce heat.  
#ꢇ Protect the power cord from being  
walked on or pinched, particularly at plugs,  
convenience receptacles, and the point  
where they exit from the apparatus.  
#ꢇ ꢕꢐꢃꢖꢇꢍꢎꢅꢇꢌꢊꢊꢌꢑꢋꢁꢅꢐꢊꢎꢗꢌꢑꢑꢅꢎꢎꢉꢆꢄꢅꢎꢇꢎꢂꢅꢑꢄ\ꢅꢒꢇ  
by the manufacturer.  
#ꢇ Unplug this apparatus during lightning  
storms or when unused for long periods  
of time.  
#ꢇ ꢘꢅꢙꢅꢆꢇꢌꢃꢃꢇꢎꢅꢆꢚꢄꢑꢄꢐꢓꢇꢊꢉꢇꢛꢍꢌꢃꢄ\ꢅꢒꢇꢎꢅꢆꢚꢄꢑꢅꢇ  
personnel. Servicing is required when  
the apparatus has been damaged in any  
way, such as power-supply cord or plug  
is damaged, liquid has been spilled or  
objects have fallen into the apparatus, the  
apparatus has been exposed to rain or  
moisture, does not operate normally, or  
has been dropped.  
#ꢇ Keep the battery away from heat, sunshine  
ꢉꢆꢇ\ꢆꢅ!ꢇ"ꢅꢚꢅꢆꢇꢒꢄꢎꢑꢌꢆꢒꢇ#ꢌꢊꢊꢅꢆꢖꢇꢄꢐꢇ\ꢆꢅ!  
#ꢇ Replace the battery with the same or  
equivalent type only.  
#ꢇ The battery contains chemical substances,  
so it should be disposed of properly.  
#ꢇ The button cell battery cannot be  
swallowed. Keep children away from the  
battery.  
#ꢇ Apparatus shall not be exposed to  
dripping or splashing.  
#ꢇ Do not place any sources of danger on the  
ꢌꢂꢂꢌꢆꢌꢊꢍꢎꢇꢏꢅ!ꢓ!ꢇꢃꢄꢛꢍꢄꢒꢇ\ꢃꢃꢅꢒꢇꢉ#$ꢅꢑꢊꢎ%ꢇꢃꢄꢓꢋꢊꢅꢒꢇ  
ꢑꢌꢐꢒꢃꢅꢎꢔ!ꢇ  
3
EN  
 
2 Your Docking  
Speaker  
Congratulations on your purchase, and  
&ꢅꢃꢑꢉꢁꢅꢇꢊꢉꢇ'ꢋꢄꢃꢄꢂꢎ()ꢇꢙꢍꢃꢃꢖꢇ#ꢅꢐꢅ\ꢊꢇꢙꢆꢉꢁꢇꢊꢋꢅꢇ  
support that Philips offers, register your product  
If you contact Philips, you will be asked for the  
model and serial number of this apparatus.The  
model number and serial number are on the  
bottom of the apparatus.Write the numbers  
here:  
*ꢉꢒꢅꢃꢇ"ꢉ!ꢇ++++++++++++++++++++++++++  
8ꢅꢆꢄꢌꢃꢇ"ꢉ!ꢇ+++++++++++++++++++++++++++  
Introduction  
With this docking speaker, you can  
#ꢇ enjoy audio from the iPod/iPhone/iPad,  
Bluetooth devices and other external  
audio devices; and  
#ꢇ synchronize the iPod/iPhone/iPad with your  
computer through USB socket.  
What’s in the box  
Check and identify the contents of your  
package:  
#ꢇ Main unit  
#ꢇ ꢘꢅꢁꢉꢊꢅꢇꢑꢉꢐꢊꢆꢉꢃꢇꢏ&ꢄꢊꢋꢇ#ꢌꢊꢊꢅꢆꢖꢔ  
#ꢇ 1 x AC power adaptor  
#ꢇ Quick start guide  
#ꢇ Safety sheet  
EN  
4
 
Overview of the main unit  
c
a
b
d
f
e
a Dock for the iPod/iPhone/iPad  
d Power supply socket  
#ꢇ Connect AC power.  
b
/
#ꢇ Adjust volume.  
e
#ꢇ As LED indicators, show system status.  
#ꢇ Sync with PC through a USB cable.  
c
f MP3-LINK  
#ꢇ Select Bluetooth mode.  
#ꢇ Turn the docking speaker on.  
#ꢇ Switch to standby mode.  
#ꢇ Connect an external audio device.  
5
EN  
 
3 Get started  
Overview of the remote  
control  
Always follow the instructions in this chapter in  
sequence.  
f
e
a
b
Prepare the remote control  
ꢍꢉꢎꢁ\ꢎꢋꢈꢏꢈꢆꢐꢄꢁꢑꢋꢄꢁ  
Remove the protective tab to activate the  
remote control battery.  
d
c
ꢁꢎꢄꢃꢔꢇꢅꢄꢁꢈꢕꢄꢁꢄꢖꢕꢇꢑꢋꢈꢄꢗꢁꢘꢇꢈꢈꢄꢎꢙꢁ  
1 Open the battery tray.  
2 Insert one CR2025 battery with correct  
ꢂꢉꢃꢌꢆꢄꢊꢖꢇꢏ<ꢗ=ꢔꢇꢌꢎꢇꢄꢐꢒꢄꢑꢌꢊꢅꢒ!  
3 Close the battery tray.  
CR2025  
a
#ꢇ Select iPod/iPhone/iPad mode.  
b
/
#ꢇ Skip to a track.  
#ꢇ Search within play.  
Connect power  
c
d
e
f
#ꢇ Mute volume.  
Caution  
# Risk of product damage! Make sure that the power  
supply voltage matches the voltage printed on the  
bottom of the docking speaker.  
# Risk of electric shock! When you unplug the AC  
ꢌꢒꢌꢂꢊꢉ%ꢇꢌꢃ&ꢌꢖꢎꢇꢂꢍꢃꢃꢇꢊꢋꢅꢇꢂꢃꢍꢓꢇꢙꢆꢉꢁꢇꢊꢋꢅꢇꢎꢉꢑ?ꢅꢊ!ꢇ"ꢅꢚꢅꢆꢇ  
pull the cord.  
#ꢇ Start or pause play.  
/
#ꢇ Adjust volume.  
#ꢇ Select MP3 link mode.  
Note  
# The type plate is located at the back of the docking  
speaker.  
EN  
6
 
Connect the AC power adaptor to:  
#ꢇ the DC IN socket at the back of the  
docking speaker.  
4 Play  
#ꢇ the wall outlet.  
Play from iPod/iPhone/iPad  
You can enjoy audio from iPod/iPhone/iPad  
through this docking speaker.  
Compatible iPod/iPhone/iPad  
The docking speaker supports the following  
iPod/iPhone/iPad models:  
Made for.  
#ꢇ iPod touch (1st, 2nd, 3rd, and 4th  
ꢓꢅꢐꢅꢆꢌꢊꢄꢉꢐꢔ  
#ꢇ iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th  
ꢓꢅꢐꢅꢆꢌꢊꢄꢉꢐꢔ  
Turn on  
#ꢇ iPhone 4S  
#ꢇ iPhone 4  
Press and hold on the main unit for 2 seconds.  
#ꢇ iPhone 3GS  
» The  
/
LED indicators light up.  
#ꢇ iPhone 3G  
#ꢇ iPhone  
Switch to standby mode  
In the following situation, the docking speaker  
switches to standby mode:  
#ꢇ Press and hold for 2 seconds again; or  
#ꢇ The system is idle for 15 minutes.  
» In standby mode, the LED indicators light  
off.  
#ꢇ iPad 2  
#ꢇ iPad  
Listen to the iPod/iPhone/iPad  
Philips DockStudio app brings a suite of new  
features to your docking speaker.To enjoy more  
features, you are recommended to install this  
free application.  
Note  
1 Insert your iPod/iPhone/iPad into the dock.  
» The docking system switches to Dock  
source automatically.  
# In standby mode, if you press on the main unit or  
/
on the remote control, the docking speaker  
» The orange LED indicators light up.  
switches to the corresponding selected source.  
7
EN  
 
2 Nꢉꢆꢇ\ꢆꢎꢊ=ꢊꢄꢁꢅꢇꢍꢎꢅ%ꢇꢖꢉꢍꢇ&ꢄꢃꢃꢇ#ꢅꢇꢌꢎ?ꢅꢒꢇꢊꢉꢇ  
install DockStudio app on your iPod/  
iPhone/iPad.  
1 Vꢙꢇꢌꢇꢐꢅ&ꢇ\ꢆꢁ&ꢌꢆꢅꢇꢍꢂꢒꢌꢊꢅꢇꢄꢎꢇꢙꢉꢍꢐꢒ%ꢇꢊꢌꢂꢇOK.  
3 Tap [Yes] ꢏꢖꢅꢎꢔꢇꢊꢉꢇꢌꢑꢑꢅꢂꢊꢇꢊꢋꢅꢇꢄꢐꢎꢊꢌꢃꢃꢌꢊꢄꢉꢐꢇ  
request.  
4 Follow the on-screen instructions to  
complete the installation.  
5 Launch the app after the installation.  
2 Follow the on-screen instructions to  
6 Play audio on your iPod/iPhone/iPad.  
» Audio comes out through this docking  
speaker.  
ꢑꢉꢁꢂꢃꢅꢊꢅꢇꢊꢋꢅꢇ\ꢆꢁ&ꢌꢆꢅꢇꢍꢂꢒꢌꢊꢅ!  
Tip  
# You can press to select Dock source.  
# With the DockStudio app, you can enjoy music, set  
ꢑꢃꢉꢑ?ꢇꢌꢐꢒꢇꢌꢃꢌꢆꢁ%ꢇꢌꢒ$ꢍꢎꢊꢇꢎꢉꢍꢐꢒꢇꢎꢅꢊꢊꢄꢐꢓꢎ%ꢇꢍꢂꢒꢌꢊꢅꢇ\ꢆꢁ&ꢌꢆꢅ%ꢇ  
and so on.  
#ꢇ To pause or resume play, press  
#ꢇ To skip to a track, press / .  
.
#ꢇ To search during play, press and hold / ,  
then release to resume normal play.  
ꢚꢃꢗꢇꢈꢄꢁ\ꢎꢐꢛꢇꢎꢄ  
Vꢙꢇ\ꢆꢁ&ꢌꢆꢅꢇꢍꢂꢒꢌꢊꢅꢇꢄꢎꢇꢌꢚꢌꢄꢃꢌ#ꢃꢅ%ꢇꢊꢋꢅꢇDockStudio  
app will search for it automatically and ask you  
to download it.  
Note  
# Make sure that your iPod/iPhone/iPad is inserted in the  
docking speaker and connected to the Internet.  
EN  
8
 
4 Launch iTunes to synchronize your docking  
speaker with PC.  
» The docked iPod/iPhone/iPad is  
synchronized with PC successfully  
through the iTunes.  
Note  
# Due to different materials and product techniques,  
some USB cables may not work with this device.  
Play from Bluetooth deivces  
Note  
# Before you connect a Bluetooth device to this docking  
speaker, familiarize yourself with the Bluetooth  
capabilities of the device.  
Note  
# Do not disconnect power or undock the iPod/iPhone/  
iPad during the updating process.  
# Keep this docking speaker away from other electronic  
devices that may cause interference.  
# The effective operation range between the docking  
speaker and the paired device is approximately 10  
ꢁꢅꢊꢅꢆꢎꢇꢏXZꢇꢙꢅꢅꢊꢔ!  
# Any obstacle between the speaker and the device can  
Charge the iPod/iPhone/iPad  
reduce the operational range.  
When the docking speaker is connected to  
power, the docked iPod/iPhone/iPad begins to  
charge automatically.  
1 Press to select Bluetooth source.  
» )ꢋꢅꢇ#ꢃꢍꢅꢇ[ꢃꢍꢅꢊꢉꢉꢊꢋꢇꢄꢐꢒꢄꢑꢌꢊꢉꢆꢇ]ꢌꢎꢋꢅꢎꢇ  
slowly.  
2 Turn on Bluetooth function on your device.  
#ꢇ Different devices may have different  
way to activate Bluetooth.  
Sync iPod/iPhone/iPad with PC  
Note  
# *ꢌ?ꢅꢇꢎꢍꢆꢅꢇꢊꢋꢌꢊꢇꢄ)ꢐꢅꢎꢇꢋꢌꢎꢇ#ꢅꢅꢐꢇꢑꢉꢐ\ꢓꢍꢆꢅꢒꢇꢂꢆꢉꢂꢅꢆꢃꢖꢇ  
in your PC.  
1 Insert the iPod/iPhone/iPad in the dock.  
2 Press and hold for 2 seconds to switch  
the docking speaker to standby mode.  
» The LED indicators light off.  
3 Connect your docking speaker and PC  
with a USB cable.  
9
EN  
 
Play from an external audio  
device  
1 If no iPod/iPhone/iPad is docked, connect  
ꢌꢐꢇ*'Xꢇꢃꢄꢐ?ꢇꢑꢌ#ꢃꢅꢇꢏX!}ꢁꢁ%ꢇꢐꢉꢊꢇꢎꢍꢂꢂꢃꢄꢅꢒꢔꢇꢊꢉ~  
#ꢇ the MP3-LINK socket at the back of  
the docking speaker.  
#ꢇ the headphone socket on an external  
device.  
2 Play music on the device (see the device’s  
ꢍꢎꢅꢆꢇꢁꢌꢐꢍꢌꢃꢔ!ꢇ  
Tip  
# You can select MP3 link source by pressing  
remote control.  
on the  
3 Scan Bluetooth devices that can pair with  
your device.  
4 When “PHILIPS DS3600” is displayed on  
your device, select it to start connection.  
» ]ꢉꢍ#ꢃꢅꢇ#ꢅꢅꢂꢇꢊꢉꢐꢅꢇꢑꢉꢐ\ꢆꢁꢌꢊꢄꢉꢐꢇꢑꢌꢐꢇ#ꢅꢇ  
heard and the Bluetooth indicator light  
up stably if connection is successful.  
Adjust volume  
ꢁꢇꢗ!ꢑꢋꢈꢁ"ꢉꢔꢑꢐꢄꢒ  
#ꢇ Press +/- on your docking speaker; or  
#ꢇ Adjust the volume control of your iPod/  
iPhone/iPad, Bluetooth device, or other  
external device.  
5 Play music in your device.  
» Music comes through the docking  
speaker.  
Tip  
Mute sound  
# If your Bluetooth device has been paired with DS3600  
#ꢅꢙꢉꢆꢅ%ꢇꢖꢉꢍꢇ$ꢍꢎꢊꢇꢐꢅꢅꢒꢇꢊꢉꢇ\ꢐꢒꢇꢉꢍꢊP'_V`V'8ꢇ]8X{ZZQꢇꢉꢐꢇ  
ꢖꢉꢍꢆꢇ[ꢃꢍꢅꢊꢉꢉꢊꢋꢇꢁꢅꢐꢍ%ꢇꢊꢋꢅꢐꢇꢑꢉꢐ\ꢆꢁꢇꢊꢋꢅꢇꢑꢉꢐꢐꢅꢑꢊꢄꢉꢐ!  
During play, press  
to mute or unmute sound.  
ꢁꢗꢆꢋꢅꢉꢊꢊꢄꢅꢈꢁꢜꢔꢑꢄꢈꢉꢉꢈꢕꢒ  
#ꢇ Press on the docking speaker again, or  
#ꢇ Deactivate Bluetooth function on  
your device or move it beyond the  
communication range.  
EN 10  
 
5 Specifications  
6 Troubleshooting  
Note  
Warning  
# Product information is subject to change without prior  
notice.  
# "ꢅꢚꢅꢆꢇꢆꢅꢁꢉꢚꢅꢇꢊꢋꢅꢇꢑꢌꢎꢄꢐꢓꢇꢉꢙꢇꢊꢋꢄꢎꢇꢌꢂꢂꢌꢆꢌꢊꢍꢎ!  
To keep the warranty valid, never try to repair  
the system yourself.  
#ꢐꢃꢔꢆ\ꢄꢎ  
Rated Output Power  
8ꢄꢓꢐꢌꢃꢇꢊꢉꢇ"ꢉꢄꢎꢅꢇꢘꢌꢊꢄꢉ  
Aux-in Link  
If you encounter problems when using this  
apparatus, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips web site  
ꢏ&&&!ꢂꢋꢄꢃꢄꢂꢎ!ꢑꢉꢁꢗ&ꢅꢃꢑꢉꢁꢅꢔ!ꢋꢅꢐꢇꢖꢉꢍꢇꢑꢉꢐꢊꢌꢑꢊꢇ  
Philips, ensure that the apparatus is nearby  
and the model number and serial number are  
available.  
2 X 10 W RMS  
> 62 dBA  
500mV RMS  
Bluetooth  
Standard  
No power  
Bluetooth Standard  
Version 2.1+EDR  
Zꢇꢒ[ꢁꢇꢏƒꢃꢌꢎꢎꢇ„ꢔ  
2.402 ~ 2.480  
GHzISM Band  
ꢈZꢇꢁꢇꢏꢙꢆꢅꢅꢇꢎꢂꢌꢑꢅꢔ  
#
Ensure that the AC power plug of the unit  
is connected properly.  
Ensure that there is power at the AC  
outlet.  
#
Output power  
Frequency band  
No sound or poor sound  
Range  
#
#
Adjust the volume of your docking speaker.  
Adjust the volume of your iPod/iPhone/  
iPad, Bluetooth devices or other external  
devices.  
General information  
AC Power  
No response from the unit  
#
Disconnect and reconnect the AC power  
plug, then turn on the unit again.  
Model:AS300-120-  
ꢀ†„}Zꢇꢏ'ꢋꢄꢃꢄꢂꢎꢔ‡  
Input: 100-240V ~,  
50/60Hz, 1.1A;  
Output: 12V 2.5 A  
Cannot sync with PC  
#
Switch the docking speaker to standby  
mode.  
Operation Power  
Consumption  
Standby Power  
Consumption  
Max. load for iPod/  
iPhone/iPad  
#
#
Try another USB cable.  
Install iTunes in PC properly.  
15 W  
<0.5 W  
5V 2.1 A  
Dimensions  
- Main Unit  
ꢏ‰ꢇŠꢇ_ꢇŠꢇ]ꢔ  
Weight  
- Main Unit  
- With Packing  
285 x 136 x 143 mm  
1.2 kg  
2.1 kg  
11 EN  
 
7 Notice  
About Bluetooth device  
Music playback is unavailable on the system  
even after successful Bluetooth connection.  
ꢀꢐꢖꢇꢑꢋꢌꢐꢓꢅꢎꢇꢉꢆꢇꢁꢉꢒꢄ\ꢑꢌꢊꢄꢉꢐꢎꢇꢁꢌꢒꢅꢇꢊꢉꢇꢊꢋꢄꢎꢇ  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
#
The device cannot be used with the  
system to play music.  
The audio quality is poor after connection  
with a Bluetooth-enabled device.  
#
The Bluetooth reception is poor. Move  
the device closer to the system or remove  
any obstacle between the device and the  
system.  
P*ꢌꢒꢅꢇꢙꢉꢆꢇꢄ'ꢉꢒ%QP*ꢌꢒꢅꢇꢙꢉꢆꢇꢄ'ꢋꢉꢐꢅ%QꢇꢌꢐꢒP*ꢌꢒꢅꢇ  
ꢙꢉꢆꢇꢄ'ꢌꢒQꢇꢁꢅꢌꢐꢇꢊꢋꢌꢊꢇꢌꢐꢇꢅꢃꢅꢑꢊꢆꢉꢐꢄꢑꢇꢌꢑꢑꢅꢎꢎꢉꢆꢖꢇ  
ꢋꢌꢎꢇ#ꢅꢅꢐꢇꢒꢅꢎꢄꢓꢐꢅꢒꢇꢊꢉꢇꢑꢉꢐꢐꢅꢑꢊꢇꢎꢂꢅꢑꢄ\ꢑꢌꢃꢃꢖꢇꢊꢉꢇ  
iPod, iPhone, or iPad, respectively, and has  
#ꢅꢅꢐꢇꢑꢅꢆꢊꢄ\ꢅꢒꢇ#ꢖꢇꢊꢋꢅꢇꢒꢅꢚꢅꢃꢉꢂꢅꢆꢇꢊꢉꢇꢁꢅꢅꢊꢇ  
Apple performance standards.Apple is not  
responsible for the operation of this device  
or its compliance with safety and regulatory  
standards. Please note that the use of this  
accessory with iPod, iPhone, or iPad may affect  
wireless performance.  
Cannot connect with the system.  
#
)ꢋꢅꢇꢒꢅꢚꢄꢑꢅꢇꢒꢉꢅꢎꢇꢐꢉꢊꢇꢎꢍꢂꢂꢉꢆꢊꢇꢊꢋꢅꢇꢂꢆꢉ\ꢃꢅꢎꢇ  
required for the system.  
#
The Bluetooth function of the device is not  
enabled. Refer to the user manual of the  
device for how to enable the function.  
The system is not in the pairing mode.  
The system is already connected with  
another Bluetooth-enabled device.  
Disconnect that device or all other  
connected devices and then try again.  
#
#
iPod and iPhone are trademarks of Apple Inc.,  
registered in the U.S. and other countries. iPad  
is a trademark of Apple Inc.  
The paired device connects and disconnects  
constantly.  
#
The Bluetooth reception is poor. Move  
the device closer to the system or remove  
any obstacle between the device and the  
system.  
For some devices, the Bluetooth  
connection may be deactivated  
automatically as a power-saving feature.  
This does not indicate any malfunction of  
the system.  
#
This product complies with the radio  
interference requirements of the European  
Community.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
EN 12  
 
When this crossed-out wheeled bin symbol is  
attached to a product it means that the product  
is covered by the European Directive 2002/96/  
EC.  
Please inform yourself about the local separate  
collection system for electrical and electronic  
products.  
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste. Correct disposal of  
your old product helps to prevent potential  
negative consequences for the environment and  
human health.  
Your product contains batteries covered by  
the European Directive 2006/66/EC, which  
cannot be disposed with normal household  
waste.Please inform yourself about the local  
rules on separate collection of batteries  
because correct disposal helps to prevent  
negative consequences for the environmental  
and human health.  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
ꢎꢅꢂꢌꢆꢌꢊꢅꢇꢄꢐꢊꢉꢇꢊꢋꢆꢅꢅꢇꢁꢌꢊꢅꢆꢄꢌꢃꢎ~ꢇꢑꢌꢆꢒ#ꢉꢌꢆꢒꢇꢏ#ꢉŠꢔ%ꢇ  
ꢂꢉꢃꢖꢎꢊꢖꢆꢅꢐꢅꢇꢙꢉꢌꢁꢇꢏ#ꢍꢙꢙꢅꢆꢔꢇꢌꢐꢒꢇꢂꢉꢃꢖꢅꢊꢋꢖꢃꢅꢐꢅꢇ  
#ꢌꢓꢎ%ꢇꢂꢆꢉꢊꢅꢑꢊꢄꢚꢅꢇꢙꢉꢌꢁꢇꢎꢋꢅꢅꢊ!ꢔꢇ  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and old  
equipment.  
13 EN  
 
Specifications are subject to change without notice  
© 2012 Koninklijke Philips Electronics N.V.  
All rights reserved.  
DS3600_12_UM_V1.0  
 

Peavey Music Mixer MMA 800T User Manual
Perception Digital CD Player PD 450 01 User Manual
Philips Indoor Furnishings 40235 31 16 User Manual
Pioneer Car Satellite TV System DEH 7300BT User Manual
Pontiac Automobile 2000 sunfire User Manual
Poulan Chainsaw PP4620AVHD User Manual
Poulan Tiller 176843 User Manual
Poulan Trimmer 545123423 User Manual
Precor Elliptical Trainer EFX546 User Manual
PYLE Audio Car Video System PLTS77DU User Manual