PYLE Audio VIEW PLVW1045R User Manual

10.4" Flip Down TFT-LCD Color  
Monitor with IR  
PLVW1045R  
1. INSTALLATION GUIDE  
1. On a towel or soft cloth, gently place the monitor unit "face  
down" on a stable work surface.  
2. Locate the pigtail with the DIN connector.  
3. Connect the DIN connector to the interface cable provided.  
4. Connect the RED wire th the positive (+) battery terminal.  
5. Connect the Black wire to a chassis electrical ground point.  
6. Connect the cable with YELLOW RCAjack to Video Input  
sources for your Video Program material.  
7. Connect the cable with RED and WHITE RCA jack to Audio  
sources for your Audio Program material.  
Yellow  
RED  
AV1  
WHITE  
Yellow  
RED  
AV2  
WHITE  
Red wire to +12VDC battery  
Black wire to electrical ground  
2
2. FUNCTION KEYS  
2.1 FUNCTIONS OF FRONT PANEL  
1. Press the "POWER" button once, it will be "POWER ON."  
POWER:  
MENU:  
Press it again, it will be "POWER OFF."  
1. Pop up the OSD menus. Press the "Menu" button again to  
enter the OSD menus. When in sub-menu, press.  
"EXIT" to go back to the main menu.  
UP/DN:  
1. Press the "UP/DOWN" key to increase or decrease value  
2. Make item selection in OSD menus to increase or decrease  
parameters as well..  
3
2.2 FUNCTIONS OF REMOTE CONTROL  
POWER  
Inc / Dec KEY  
MENU  
MENU  
MUTE  
AV1/AV2  
REMOTE CONTROLLER  
Brightness:  
Brightness, contrast adjustment  
RGB color density, deviation, sharpness  
adjustment  
Video Control:  
OSD Function:  
Image:  
OSD adjustment and display methods  
Switch the source of signal AV1 and AV2  
Inputs.  
Audio:  
Recall:  
Exit:  
Only control Mute  
Return to the initiatives  
Exit  
PRess "Menu key", it will display a crosswise bar with digits. To  
use U/D key to adjust value and press "Menu key" to confirm the  
adjustment and then the crosswise bar and digits will disappear, or  
press "Exit" to leave OSD function directly.  
4
3. TROUBLE SHOOTING  
3.1 NO POWER  
1. Make sure the power cable has been pluged in.  
2. Make sure the plug has 12V~14V, may use another  
electrical appliance to test it.  
3.2 NO FUNCTION OF REMOTE CONTROL  
1. Make sure the batteries are in good condition and installed  
properly.  
2. Make sure the remote control is aiming at the receiver, and  
there are no obstacles in between.  
3. Perhaps, it is too far away from the receiver. Normal  
distance is within 7 meters.  
3.3 NO DISPLAY OR NOT CLEAR  
1. Check the video signal wires if they are connected  
properly.  
2. Make sure the TV/Video is in proper position.  
4. ACCESSORIES  
PS2/CAR CABLE  
INSTALLATION BRACKET  
SCREW PACK  
USER MANUAL  
REMOTE CONTROL  
5
5. SPECIFICATIONS  
DESCRIPTION  
10.4" a-Si TFT active matrix  
26.4cm diagonal (10.4 inch)  
640(H) x 3(RGB) x 480(V)  
165(W) x 95(H)  
ITEM  
LCD Panel Type  
Screen Size:  
Display Resolution (dot):  
Active Area:  
Pixel Pitch:  
0.33(H) x 0.33(V)mm  
CCFL (Cold cathode filament tube)  
4 : 3  
Back Light:  
LCD Profile Ratio:  
Contrast Ratio:  
Brightness:  
200 : 1  
220 cd/m2  
+
Power Input Consumption:  
System:  
DC12V 10% less than 0.8A  
-
NTSC and PAL auto switch  
SCEAM is available  
Composite video signal 1Vp-p 75 ohms  
PS2 x 2  
Video Input:  
Video Input:  
Viewing Angle:  
Lift & Right 45 degree  
Down 20 degree Top 30 degree  
265.0mm(W) x 268mm(H) x 40.8mm(D)  
0 C ~ +60 C  
Dimensional Outline (mm):  
Operation Temperature:  
Storage Temperature:  
Humidity:  
-20 C ~ +80 C  
10 ~ 90%  
Monitor Weight:  
1.8kg  
Safety Certifications:  
Monitor Rotate:  
UL FCC CE TUV  
Right 90 & Left 90  
* Recommend for use with PYLE'S PLVWH1 wireless headphones.  
6

Rockford Fosgate Car Speaker FRC3205 User Manual
Philips R6B2A245 User Manual
Philips Car Stereo System SA1ARA02 User Manual
Panasonic CQ VA707N User Manual
Motorola H670 User Manual
Lanzar Car Audio Car Stereo System SD82 User Manual
Kodak KLIC 7001 User Manual
KitchenAid 4KFP720BU2 User Manual
Kenmore THE ECONOMIZER 15333204 User Manual
JVC KD ADV49 User Manual